HS4IOO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4IOO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1765514214	32.04 °C	49.6 %RH	1005.8 hPa	4.18 V
1765513614	31.26 °C	51.4 %RH	1006 hPa	4.17 V
1765513014	31.1 °C	51.6 %RH	1006.1 hPa	4.18 V
1765512414	31.54 °C	50.5 %RH	1006.3 hPa	4.17 V
1765511814	30.72 °C	52 %RH	1006.5 hPa	4.18 V
1765511214	29.59 °C	54.3 %RH	1006.6 hPa	4.16 V
1765510636	29.95 °C	53.5 %RH	1006.6 hPa	4.17 V
1765510014	29.86 °C	54.5 %RH	1006.8 hPa	4.09 V
1765509413	29.22 °C	55.6 %RH	1006.7 hPa	4.1 V
1765508813	28.98 °C	56.2 %RH	1006.8 hPa	4.12 V
1765508213	29.02 °C	56 %RH	1006.9 hPa	4.17 V
1765507613	29.17 °C	55.7 %RH	1007 hPa	4.18 V
1765507013	29.11 °C	55.8 %RH	1007 hPa	4.18 V
1765506413	28.76 °C	57.1 %RH	1006.9 hPa	4.18 V
1765505813	28.93 °C	55.7 %RH	1007 hPa	4.18 V
1765505213	29.65 °C	54.9 %RH	1006.9 hPa	4.18 V
1765504613	29.09 °C	56.4 %RH	1006.8 hPa	4.18 V
1765504013	27.37 °C	60.6 %RH	1006.7 hPa	4.17 V
1765503413	27.29 °C	60.8 %RH	1006.8 hPa	4.1 V
1765502813	27.54 °C	60 %RH	1006.9 hPa	4.11 V
1765502213	27.72 °C	59.2 %RH	1006.7 hPa	4.12 V
1765501613	27.86 °C	59.3 %RH	1006.5 hPa	4.18 V
1765501013	27.53 °C	60 %RH	1006.3 hPa	4.18 V
1765500433	27.86 °C	59.2 %RH	1006.1 hPa	4.18 V
1765499813	27.52 °C	60.3 %RH	1005.8 hPa	4.18 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)