LU8ANS-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU8ANS-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1773242678	48 Pkt	5 Pkt	2 Pkt	-36 dBm	12.92 V
1773241755	60 Pkt	1 Pkt	3 Pkt	-40 dBm	12.9 V
1773240831	32 Pkt	2 Pkt	5 Pkt	-41 dBm	12.92 V
1772941338	50 Pkt	13 Pkt	8 Pkt	-36 dBm	12.9 V
1772940415	46 Pkt	5 Pkt	11 Pkt	-30 dBm	12.88 V
1772939492	57 Pkt	9 Pkt	0 Pkt	-34 dBm	12.88 V
1772938569	30 Pkt	1 Pkt	2 Pkt	-29 dBm	12.88 V
1772937646	50 Pkt	7 Pkt	3 Pkt	-36 dBm	12.9 V
1772936723	28 Pkt	1 Pkt	0 Pkt	-36 dBm	12.94 V
1772935800	40 Pkt	5 Pkt	4 Pkt	-40 dBm	12.88 V
1772934878	24 Pkt	0 Pkt	3 Pkt	-34 dBm	12.88 V
1772929515	31 Pkt	3 Pkt	1 Pkt	-31 dBm	12.88 V
1772928592	27 Pkt	7 Pkt	0 Pkt	-31 dBm	12.88 V
1772927669	32 Pkt	3 Pkt	0 Pkt	-30 dBm	12.88 V
1772926747	36 Pkt	6 Pkt	0 Pkt	-31 dBm	12.9 V
1772925824	16 Pkt	4 Pkt	0 Pkt	-31 dBm	12.88 V
1772924901	48 Pkt	7 Pkt	2 Pkt	-33 dBm	12.88 V
1772923977	17 Pkt	3 Pkt	0 Pkt	-35 dBm	12.88 V
1772923055	38 Pkt	2 Pkt	2 Pkt	-32 dBm	12.9 V
1772922132	1 Pkt	0 Pkt	0 Pkt	-33 dBm	12.9 V
1772921210	0 Pkt	0 Pkt	0 Pkt	-34 dBm	12.88 V
1772920288	0 Pkt	0 Pkt	0 Pkt	-34 dBm	12.98 V
1772901292	31 Pkt	3 Pkt	2 Pkt	-37 dBm	12.92 V
1772900369	40 Pkt	1 Pkt	0 Pkt	-40 dBm	12.92 V
1772897470	70 Pkt	3 Pkt	0 Pkt	-36 dBm	12.9 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)