This is the latest recevied telemetry packets stored in our database for station/object WOSS2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Supply*
Batt*
Value3*
Value4*
Value5*
1778027080
13.6 V
1.87 A
0
0
0
1777955436
12.88 V
-0.21 A
0
0
0
1777859732
13.6 V
2.08 A
0
0
0
1777788138
12.87 V
-0.21 A
0
0
0
1777692842
13.27 V
0.1 A
0
0
0
1777597640
13.61 V
1.46 A
0
0
0
1777573710
14.29 V
3.11 A
0
0
0
1777431198
13.61 V
1.26 A
0
0
0
1777336271
13.61 V
0.97 A
0
0
0
1777265078
12.93 V
-0.21 A
0
0
0
1777169853
13.61 V
1.37 A
0
0
0
*Used Equation Coefficients:
Supply: 0, 1, 0
Batt: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)