F5OPV-zz Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F5OPV-zz. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Temp*	RH*	Patm*	Lux.*
1772642807	4.78 volts	19.6 C	66 %	1018.2 hPa	52 %
1772641606	4.78 volts	20.1 C	65 %	1018.2 hPa	60 %
1772640404	4.78 volts	20.2 C	66 %	1018.5 hPa	59 %
1772639199	4.78 volts	20.9 C	65 %	1018.5 hPa	66 %
1772637996	4.78 volts	21.3 C	64 %	1018.4 hPa	69 %
1772635591	4.78 volts	22.4 C	63 %	1019 hPa	77 %
1772634389	4.78 volts	22.8 C	62 %	1019 hPa	76 %
1772633186	4.8 volts	22.5 C	63 %	1019.1 hPa	80 %
1772631983	4.78 volts	22.6 C	63 %	1019.4 hPa	80 %
1772630780	4.78 volts	22.9 C	62 %	1019.7 hPa	85 %
1772629577	4.78 volts	22.5 C	63 %	1020 hPa	83 %
1772628376	4.78 volts	23 C	62 %	1020.3 hPa	87 %
1772627171	4.78 volts	22 C	64 %	1020.5 hPa	85 %
1772625968	4.78 volts	21.8 C	64 %	1020.8 hPa	84 %
1772624766	4.78 volts	21.3 C	65 %	1021.1 hPa	84 %
1772623563	4.78 volts	20.8 C	65 %	1021.2 hPa	85 %
1772622360	4.78 volts	20.6 C	65 %	1021.4 hPa	86 %
1772621157	4.78 volts	20.3 C	66 %	1021.4 hPa	88 %
1772619954	4.78 volts	20.1 C	66 %	1021.5 hPa	90 %
1772618752	4.77 volts	19.7 C	66 %	1021.5 hPa	92 %
1772617547	4.77 volts	19.4 C	66 %	1021.6 hPa	94 %
1772616343	4.77 volts	18.1 C	67 %	1021.6 hPa	95 %
1772615140	4.77 volts	16.8 C	69 %	1021.7 hPa	94 %
1772613937	4.77 volts	16.1 C	70 %	1021.7 hPa	91 %
1772612736	4.77 volts	17.4 C	67 %	1021.6 hPa	93 %

*Used Equation Coefficients:

Vbat: 0, 1, 0

Temp: 0, 1, 0

RH: 0, 1, 0

Patm: 0, 1, 0

Lux.: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)