TA9AG-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA9AG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1765367042	0 Pkt	2 Pkt	0 Pkt	-50 dBm	12.2 V
1765366116	0 Pkt	0 Pkt	0 Pkt	-49 dBm	12.26 V
1765365194	0 Pkt	2 Pkt	0 Pkt	-50 dBm	12.26 V
1765364269	0 Pkt	0 Pkt	0 Pkt	-50 dBm	12.26 V
1765363310	0 Pkt	0 Pkt	0 Pkt	-50 dBm	12.3 V
1765362635	219 Pkt	0 Pkt	7 Pkt	-51 dBm	12.26 V
1765361682	210 Pkt	2 Pkt	10 Pkt	-52 dBm	12.26 V
1765360677	13 Pkt	0 Pkt	1 Pkt	-52 dBm	12.26 V
1765359880	163 Pkt	2 Pkt	11 Pkt	-49 dBm	12.26 V
1765358935	177 Pkt	0 Pkt	11 Pkt	-48 dBm	12.26 V
1765357990	187 Pkt	2 Pkt	1 Pkt	-48 dBm	12.26 V
1765357041	127 Pkt	0 Pkt	5 Pkt	-49 dBm	12.26 V
1765356100	146 Pkt	2 Pkt	7 Pkt	-50 dBm	12.26 V
1765355157	188 Pkt	0 Pkt	14 Pkt	-49 dBm	12.26 V
1765354329	210 Pkt	2 Pkt	9 Pkt	-49 dBm	12.26 V
1765353376	17 Pkt	0 Pkt	1 Pkt	-49 dBm	12.26 V
1765353131	181 Pkt	0 Pkt	14 Pkt	-49 dBm	12.24 V
1765352183	203 Pkt	2 Pkt	8 Pkt	-49 dBm	12.26 V
1765351227	198 Pkt	0 Pkt	7 Pkt	-49 dBm	12.26 V
1765350278	216 Pkt	2 Pkt	4 Pkt	-49 dBm	12.26 V
1765349327	190 Pkt	0 Pkt	11 Pkt	-49 dBm	12.26 V
1765348374	198 Pkt	2 Pkt	3 Pkt	-49 dBm	12.26 V
1765347426	181 Pkt	0 Pkt	2 Pkt	-49 dBm	12.26 V
1765346481	200 Pkt	2 Pkt	1 Pkt	-49 dBm	12.26 V
1765345527	183 Pkt	2 Pkt	4 Pkt	-49 dBm	12.26 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)