DL3SU-98 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL3SU-98. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1773287694	1009.6 hPa	13.7 C deg	1024.2 hPa	0 C deg
1773285879	1009.4 hPa	13.8 C deg	1024 hPa	0 C deg
1773284064	1009.1 hPa	13.9 C deg	1023.7 hPa	0 C deg
1773282249	1009 hPa	13.9 C deg	1023.6 hPa	0 C deg
1773280434	1008.7 hPa	14 C deg	1023.3 hPa	0 C deg
1773278619	1008.3 hPa	14 C deg	1022.9 hPa	0 C deg
1773276804	1008 hPa	14.1 C deg	1022.6 hPa	0 C deg
1773274989	1007.7 hPa	14.1 C deg	1022.3 hPa	0 C deg
1773273174	1007.3 hPa	14.2 C deg	1021.9 hPa	0 C deg
1773271359	1007 hPa	14.2 C deg	1021.6 hPa	0 C deg
1773269544	1006.6 hPa	14.3 C deg	1021.1 hPa	0 C deg
1773267732	1006.1 hPa	14.3 C deg	1020.6 hPa	0 C deg
1773265917	1005.5 hPa	14.4 C deg	1020 hPa	0 C deg
1773264102	1005.1 hPa	14.4 C deg	1019.7 hPa	0 C deg
1773262287	1004.6 hPa	14.4 C deg	1019.1 hPa	0 C deg
1773260472	1004.2 hPa	14.5 C deg	1018.7 hPa	0 C deg
1773258657	1003.8 hPa	14.5 C deg	1018.3 hPa	0 C deg
1773256842	1003.4 hPa	14.4 C deg	1017.9 hPa	0 C deg
1773255028	1003.1 hPa	14.5 C deg	1017.6 hPa	0 C deg
1773253212	1002.7 hPa	14.5 C deg	1017.2 hPa	0 C deg
1773251395	1002.3 hPa	14.5 C deg	1016.8 hPa	0 C deg
1773249580	1001.9 hPa	14.6 C deg	1016.4 hPa	0 C deg
1773247765	1001.6 hPa	14.7 C deg	1016.1 hPa	0 C deg
1773245950	1001.5 hPa	14.7 C deg	1016 hPa	0 C deg
1773244135	1001.1 hPa	14.7 C deg	1015.6 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)