BX6AED-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX6AED-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ALL_PKTS_10M*	FWD_APRS_10M*	POS_PKTS_10M*	MSG_PKTS_10M*	CTRL_PKTS_10M*
1787578053	45 cnt	0 cnt	33 cnt	1 cnt	11 cnt
1787577453	47 cnt	1 cnt	34 cnt	0 cnt	13 cnt
1787576853	54 cnt	0 cnt	37 cnt	1 cnt	16 cnt
1787576253	49 cnt	0 cnt	32 cnt	1 cnt	16 cnt
1787575653	45 cnt	0 cnt	34 cnt	2 cnt	9 cnt
1787575053	50 cnt	0 cnt	32 cnt	0 cnt	18 cnt
1787574453	44 cnt	0 cnt	34 cnt	1 cnt	9 cnt
1787573853	47 cnt	0 cnt	33 cnt	1 cnt	13 cnt
1787573253	41 cnt	0 cnt	29 cnt	0 cnt	12 cnt
1787572653	48 cnt	0 cnt	36 cnt	1 cnt	11 cnt
1787572053	47 cnt	0 cnt	33 cnt	1 cnt	13 cnt
1787571453	50 cnt	0 cnt	37 cnt	1 cnt	12 cnt
1787570253	53 cnt	0 cnt	36 cnt	0 cnt	17 cnt
1787569652	66 cnt	0 cnt	44 cnt	1 cnt	21 cnt
1787569052	49 cnt	0 cnt	38 cnt	1 cnt	10 cnt
1787568451	46 cnt	0 cnt	37 cnt	1 cnt	8 cnt
1787567852	50 cnt	0 cnt	35 cnt	0 cnt	15 cnt
1787567251	56 cnt	0 cnt	42 cnt	1 cnt	13 cnt
1787566651	49 cnt	1 cnt	36 cnt	1 cnt	12 cnt
1787566051	48 cnt	1 cnt	37 cnt	1 cnt	10 cnt
1787565451	51 cnt	0 cnt	38 cnt	1 cnt	12 cnt
1787564851	48 cnt	0 cnt	31 cnt	1 cnt	16 cnt
1787564251	46 cnt	0 cnt	33 cnt	0 cnt	13 cnt
1787563651	49 cnt	0 cnt	38 cnt	1 cnt	10 cnt
1787563051	45 cnt	0 cnt	35 cnt	1 cnt	9 cnt

*Used Equation Coefficients:

ALL_PKTS_10M: 0, 1, 0

FWD_APRS_10M: 0, 1, 0

POS_PKTS_10M: 0, 1, 0

MSG_PKTS_10M: 0, 1, 0

CTRL_PKTS_10M: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)