IU5GBQ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU5GBQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1776994027	57 Count	0 Count	0 Count	0 VDC	0 VDC
1776993726	56 Count	0 Count	0 Count	0 VDC	0 VDC
1776993426	55 Count	0 Count	0 Count	0 VDC	0 VDC
1776993125	54 Count	0 Count	0 Count	0 VDC	0 VDC
1776992824	53 Count	0 Count	0 Count	0 VDC	0 VDC
1776992523	52 Count	0 Count	0 Count	0 VDC	0 VDC
1776992223	51 Count	0 Count	0 Count	0 VDC	0 VDC
1776991922	50 Count	0 Count	0 Count	0 VDC	0 VDC
1776991621	49 Count	0 Count	0 Count	0 VDC	0 VDC
1776991320	48 Count	0 Count	0 Count	0 VDC	0 VDC
1776991020	47 Count	0 Count	0 Count	0 VDC	0 VDC
1776990719	46 Count	0 Count	0 Count	0 VDC	0 VDC
1776990418	45 Count	0 Count	0 Count	0 VDC	0 VDC
1776990117	44 Count	0 Count	0 Count	0 VDC	0 VDC
1776989817	43 Count	0 Count	0 Count	0 VDC	0 VDC
1776989516	42 Count	0 Count	0 Count	0 VDC	0 VDC
1776989215	41 Count	0 Count	0 Count	0 VDC	0 VDC
1776988914	40 Count	0 Count	0 Count	0 VDC	0 VDC
1776988614	39 Count	0 Count	0 Count	0 VDC	0 VDC
1776988313	38 Count	0 Count	0 Count	0 VDC	0 VDC
1776988012	37 Count	0 Count	0 Count	0 VDC	0 VDC
1776987711	36 Count	0 Count	0 Count	0 VDC	0 VDC
1776987411	35 Count	0 Count	0 Count	0 VDC	0 VDC
1776987110	34 Count	0 Count	0 Count	0 VDC	0 VDC
1776986809	33 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)