FCREEK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object FCREEK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1766031737	13.18 Volt	360 Pkt	290 Pkt	72 Pcnt	19 C
1766030836	13.18 Volt	390 Pkt	310 Pkt	73 Pcnt	19.5 C
1766029935	13.18 Volt	400 Pkt	320 Pkt	73 Pcnt	20 C
1766029052	13.18 Volt	410 Pkt	320 Pkt	74 Pcnt	20.5 C
1766028133	13.18 Volt	370 Pkt	290 Pkt	73 Pcnt	20 C
1766027233	13.18 Volt	350 Pkt	280 Pkt	72 Pcnt	20.5 C
1766026332	13.18 Volt	380 Pkt	310 Pkt	74 Pcnt	20.5 C
1766025431	13.18 Volt	390 Pkt	330 Pkt	73 Pcnt	20.5 C
1766024531	13.18 Volt	440 Pkt	370 Pkt	71 Pcnt	21 C
1766023631	13.18 Volt	480 Pkt	400 Pkt	70 Pcnt	21 C
1766022730	13.18 Volt	480 Pkt	390 Pkt	67 Pcnt	21 C
1766021827	13.1 Volt	490 Pkt	390 Pkt	67 Pcnt	21.5 C
1766020927	13.18 Volt	470 Pkt	350 Pkt	66 Pcnt	21.5 C
1766020026	12.96 Volt	420 Pkt	320 Pkt	65 Pcnt	22 C
1766018287	13.18 Volt	360 Pkt	280 Pkt	65 Pcnt	23.5 C
1766017323	13.18 Volt	340 Pkt	270 Pkt	64 Pcnt	24.5 C
1766016423	13.25 Volt	360 Pkt	290 Pkt	67 Pcnt	25.5 C
1766015521	13.25 Volt	350 Pkt	290 Pkt	68 Pcnt	27 C
1766014620	13.32 Volt	350 Pkt	280 Pkt	67 Pcnt	28 C
1766013720	13.32 Volt	360 Pkt	290 Pkt	69 Pcnt	29 C
1766012819	13.32 Volt	330 Pkt	270 Pkt	65 Pcnt	30 C
1766011918	13.32 Volt	340 Pkt	270 Pkt	65 Pcnt	30 C
1766011094	13.32 Volt	340 Pkt	280 Pkt	64 Pcnt	30.5 C
1766010116	13.32 Volt	340 Pkt	280 Pkt	63 Pcnt	31.5 C
1766009215	13.4 Volt	350 Pkt	300 Pkt	62 Pcnt	31.5 C

*Used Equation Coefficients:

Vin: 0, 0.0728, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)