OK1UXX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1UXX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1784661663	841 Count	305 Count	62 Count	4.22 VDC	0.2 VDC
1784660456	838 Count	303 Count	61 Count	4.23 VDC	0.18 VDC
1784659249	834 Count	301 Count	59 Count	4.29 VDC	0.2 VDC
1784658042	831 Count	300 Count	58 Count	4.25 VDC	0.18 VDC
1784656836	828 Count	299 Count	57 Count	4.23 VDC	0.2 VDC
1784638296	827 Count	299 Count	57 Count	4.26 VDC	0.2 VDC
1784638041	826 Count	299 Count	57 Count	4.21 VDC	0.18 VDC
1784637807	825 Count	299 Count	57 Count	4.22 VDC	0.2 VDC
1784575968	823 Count	299 Count	57 Count	4.28 VDC	0.2 VDC
1784574761	821 Count	298 Count	57 Count	4.31 VDC	0.2 VDC
1784573554	819 Count	298 Count	57 Count	4.28 VDC	0.18 VDC
1784572473	817 Count	297 Count	57 Count	4.22 VDC	0.16 VDC
1784571266	815 Count	297 Count	57 Count	4.29 VDC	0.18 VDC
1784570059	813 Count	296 Count	57 Count	4.22 VDC	0.18 VDC
1784568853	811 Count	295 Count	57 Count	4.24 VDC	0.18 VDC
1784567646	809 Count	295 Count	57 Count	4.33 VDC	0.2 VDC
1784566439	807 Count	294 Count	57 Count	4.25 VDC	0.2 VDC
1784565232	805 Count	293 Count	57 Count	4.27 VDC	0.2 VDC
1784564025	803 Count	293 Count	57 Count	4.26 VDC	0.18 VDC
1784562818	801 Count	292 Count	57 Count	4.21 VDC	0.2 VDC
1784561611	799 Count	291 Count	57 Count	4.23 VDC	0.2 VDC
1784560404	797 Count	291 Count	57 Count	4.25 VDC	0.18 VDC
1784559197	795 Count	291 Count	57 Count	4.24 VDC	0.18 VDC
1784557990	793 Count	290 Count	57 Count	4.24 VDC	0.2 VDC
1784556783	791 Count	289 Count	57 Count	4.29 VDC	0.16 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)