YO3JAZ-GG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-GG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CO2*	CPU*	Temp*	Baro*	Load*
1784666262	1020 ppm	46 C	28.5 C	1007.2 hPa	43.6 %
1784665902	1020 ppm	47.2 C	28.5 C	1007.2 hPa	44 %
1784665542	1030 ppm	47.2 C	28.5 C	1007.2 hPa	44 %
1784665182	1020 ppm	47.2 C	28.5 C	1007.2 hPa	44 %
1784664822	1030 ppm	47.2 C	28.5 C	1007.2 hPa	44 %
1784664462	1030 ppm	46 C	28.5 C	1007.6 hPa	44 %
1784664102	1030 ppm	46 C	28.5 C	1007.6 hPa	43.6 %
1784663742	1040 ppm	46 C	28.5 C	1007.6 hPa	44 %
1784663382	1040 ppm	47.2 C	28.5 C	1008 hPa	44.4 %
1784663022	1030 ppm	46 C	28.5 C	1008 hPa	44 %
1784662662	1030 ppm	46 C	28.5 C	1008 hPa	44 %
1784662302	1030 ppm	47.2 C	28.5 C	1008 hPa	43.2 %
1784661953	1040 ppm	46 C	28.5 C	1007.6 hPa	44 %
1784661582	1030 ppm	46 C	28.5 C	1007.6 hPa	43.6 %
1784661222	1040 ppm	46 C	28.5 C	1007.6 hPa	43.2 %
1784660862	1040 ppm	46 C	28.5 C	1007.6 hPa	43.2 %
1784660502	1050 ppm	46 C	28.5 C	1007.6 hPa	43.2 %
1784660142	1050 ppm	47.2 C	28.5 C	1007.6 hPa	43.2 %
1784659782	1050 ppm	47.2 C	28.5 C	1007.6 hPa	42.8 %
1784659422	1050 ppm	47.2 C	28.5 C	1007.6 hPa	43.2 %
1784659062	1050 ppm	47.2 C	28.5 C	1007.6 hPa	43.6 %
1784658702	1050 ppm	46 C	28.5 C	1007.6 hPa	44 %
1784658342	1050 ppm	46 C	28.5 C	1007.6 hPa	44 %
1784657982	1050 ppm	47.2 C	28.5 C	1007.6 hPa	43.2 %
1784657622	1050 ppm	46 C	28.5 C	1007.6 hPa	43.2 %

*Used Equation Coefficients:

CO2: 0, 10, 0

CPU: 0, 0.4, 0

Temp: 0, 0.5, -25

Baro: 0, 0.4, 950

Load: 0, 0.4, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)