M1NER-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object M1NER-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1784696663	0.12 Load	36.02 DegC	2911 Mb	1829 Pkt	91 Pkt
1784696363	0.12 Load	36.02 DegC	2904 Mb	1809 Pkt	79 Pkt
1784696063	0.15 Load	35.54 DegC	2905 Mb	2602 Pkt	76 Pkt
1784695763	0.15 Load	37 DegC	2909 Mb	2151 Pkt	89 Pkt
1784695463	0.16 Load	36.51 DegC	2904 Mb	1797 Pkt	91 Pkt
1784695163	0.16 Load	37.49 DegC	2909 Mb	2218 Pkt	75 Pkt
1784694863	0.16 Load	35.54 DegC	2910 Mb	3308 Pkt	103 Pkt
1784694563	0.16 Load	37 DegC	2903 Mb	1952 Pkt	67 Pkt
1784694263	0.18 Load	37 DegC	2906 Mb	1901 Pkt	87 Pkt
1784693963	0.2 Load	36.02 DegC	2905 Mb	1978 Pkt	100 Pkt
1784693663	0.14 Load	36.02 DegC	2895 Mb	1798 Pkt	85 Pkt
1784693363	0.13 Load	36.51 DegC	2904 Mb	1725 Pkt	81 Pkt
1784693062	0.11 Load	35.54 DegC	2910 Mb	1969 Pkt	105 Pkt
1784692763	0.1 Load	35.54 DegC	2897 Mb	2607 Pkt	82 Pkt
1784692484	0.1 Load	36.02 DegC	2907 Mb	2254 Pkt	86 Pkt
1784692163	0.12 Load	36.51 DegC	2899 Mb	2317 Pkt	96 Pkt
1784691863	0.13 Load	37 DegC	2902 Mb	3249 Pkt	86 Pkt
1784691563	0.11 Load	35.05 DegC	2906 Mb	2019 Pkt	79 Pkt
1784691263	0.13 Load	36.02 DegC	2909 Mb	2422 Pkt	79 Pkt
1784690963	0.15 Load	35.54 DegC	2904 Mb	1947 Pkt	63 Pkt
1784690663	0.12 Load	37 DegC	2901 Mb	2269 Pkt	80 Pkt
1784690363	0.13 Load	36.51 DegC	2897 Mb	2198 Pkt	88 Pkt
1784690063	0.13 Load	35.54 DegC	2902 Mb	2207 Pkt	81 Pkt
1784689763	0.16 Load	35.54 DegC	2900 Mb	2645 Pkt	79 Pkt
1784689463	0.14 Load	35.54 DegC	2910 Mb	1946 Pkt	93 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)