This is the latest recevied telemetry packets stored in our database for station/object IZ5YYF-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Press*
Temp.in*
Hum*
QNH*
Temp.out*
1789867114
986.4 hPa
27.1 C deg
54.9 %
1027.7 hPa
0 C deg
1789826807
983.5 hPa
27.3 C deg
50.2 %
1024.6 hPa
0 C deg
1789775585
981.6 hPa
27 C deg
55.8 %
1022.7 hPa
0 C deg
1789764679
980.1 hPa
26.9 C deg
58.1 %
1021.1 hPa
0 C deg
1789762765
980 hPa
26.8 C deg
58.3 %
1021 hPa
0 C deg
1789197282
983.7 hPa
27.6 C deg
50.1 %
1024.8 hPa
0 C deg
1789166132
983.3 hPa
28.3 C deg
49.7 %
1024.3 hPa
0 C deg
1789164305
983.4 hPa
28.2 C deg
49.4 %
1024.4 hPa
0 C deg
1789162483
983.2 hPa
28.4 C deg
49 %
1024.2 hPa
0 C deg
1789147833
981.2 hPa
28.2 C deg
46.3 %
1022.1 hPa
0 C deg
1789131379
980.4 hPa
26.8 C deg
48 %
1021.4 hPa
0 C deg
1789127704
980.2 hPa
26.8 C deg
50.8 %
1021.3 hPa
0 C deg
1789124061
980.1 hPa
26.9 C deg
47.2 %
1021.1 hPa
0 C deg
1789122213
980.1 hPa
26.8 C deg
48.4 %
1021.1 hPa
0 C deg
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)