This is the latest recevied telemetry packets stored in our database for station/object KF8CEQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
RFIn*
RFiGate*
DigiRpt*
Temp*
InetiGate*
1766089379
28 Pkts
28 Pkts
7 Pkts
21 C
0 Pkts
1766085779
23 Pkts
23 Pkts
6 Pkts
21 C
0 Pkts
1766082179
28 Pkts
28 Pkts
3 Pkts
21 C
0 Pkts
1766078579
37 Pkts
37 Pkts
6 Pkts
22 C
0 Pkts
1766074979
49 Pkts
49 Pkts
7 Pkts
21 C
0 Pkts
1766071379
41 Pkts
41 Pkts
10 Pkts
21 C
0 Pkts
1766067779
49 Pkts
49 Pkts
20 Pkts
21 C
0 Pkts
1766064179
3 Pkts
3 Pkts
1 Pkts
21 C
0 Pkts
1766060579
9 Pkts
9 Pkts
6 Pkts
21 C
0 Pkts
1766056979
2 Pkts
2 Pkts
0 Pkts
21 C
0 Pkts
1766053379
5 Pkts
5 Pkts
3 Pkts
21 C
0 Pkts
1766049779
8 Pkts
8 Pkts
3 Pkts
20 C
0 Pkts
1766046179
0 Pkts
0 Pkts
0 Pkts
21 C
0 Pkts
1766042579
1 Pkts
1 Pkts
0 Pkts
21 C
0 Pkts
1766038978
0 Pkts
0 Pkts
0 Pkts
21 C
0 Pkts
1766035399
3 Pkts
2 Pkts
0 Pkts
21 C
0 Pkts
1766026879
0 Pkts
0 Pkts
0 Pkts
21 C
0 Pkts
1766023280
0 Pkts
0 Pkts
0 Pkts
24 C
0 Pkts
*Used Equation Coefficients:
RFIn: 0, 1, 0
RFiGate: 0, 1, 0
DigiRpt: 0, 1, 0
Temp: 0, 1, 0
InetiGate: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)