K4XAT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K4XAT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1787552516	284 Pkts	276 Pkts	68 Pkts	41 C
1787548916	271 Pkts	263 Pkts	77 Pkts	41 C
1787545316	328 Pkts	319 Pkts	70 Pkts	41 C
1787541716	211 Pkts	208 Pkts	57 Pkts	40 C
1787538116	200 Pkts	199 Pkts	47 Pkts	40 C
1787534516	257 Pkts	257 Pkts	52 Pkts	40 C
1787530916	258 Pkts	258 Pkts	64 Pkts	40 C
1787527316	258 Pkts	258 Pkts	49 Pkts	40 C
1787523716	245 Pkts	243 Pkts	54 Pkts	40 C
1787520116	256 Pkts	256 Pkts	58 Pkts	40 C
1787516516	331 Pkts	331 Pkts	51 Pkts	40 C
1787512916	330 Pkts	330 Pkts	52 Pkts	41 C
1787509318	265 Pkts	263 Pkts	55 Pkts	41 C
1787444115	141 Pkts	141 Pkts	27 Pkts	40 C
1787440515	206 Pkts	204 Pkts	36 Pkts	40 C
1787436915	208 Pkts	208 Pkts	37 Pkts	40 C
1787433316	324 Pkts	324 Pkts	47 Pkts	40 C
1787429715	256 Pkts	256 Pkts	51 Pkts	40 C
1787426116	300 Pkts	300 Pkts	44 Pkts	41 C
1787422515	253 Pkts	253 Pkts	51 Pkts	41 C
1787418915	253 Pkts	253 Pkts	51 Pkts	41 C
1787415315	290 Pkts	290 Pkts	64 Pkts	41 C
1787411715	324 Pkts	323 Pkts	61 Pkts	41 C
1787408115	354 Pkts	353 Pkts	60 Pkts	41 C
1787404516	340 Pkts	340 Pkts	64 Pkts	41 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)