E25XKG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E25XKG-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1787554418	5 Pkt	6 Pkt	-76 dBm	13 V
1787550790	3 Pkt	2 Pkt	-75 dBm	13.04 V
1787549918	8 Pkt	4 Pkt	-76 dBm	13.04 V
1787546290	8 Pkt	2 Pkt	-76 dBm	13.06 V
1787542663	11 Pkt	4 Pkt	-74 dBm	13.1 V
1787539036	12 Pkt	1 Pkt	-73 dBm	13.1 V
1787535408	19 Pkt	0 Pkt	-73 dBm	13.1 V
1787531869	13 Pkt	7 Pkt	-74 dBm	13.1 V
1787528153	90 Pkt	3 Pkt	-75 dBm	13.13 V
1787524525	17 Pkt	2 Pkt	-72 dBm	13.13 V
1787520897	16 Pkt	5 Pkt	-74 dBm	13.13 V
1787517339	17 Pkt	2 Pkt	-73 dBm	13.08 V
1787513641	16 Pkt	3 Pkt	-73 dBm	13.1 V
1787510015	17 Pkt	0 Pkt	-74 dBm	13.1 V
1787506386	15 Pkt	1 Pkt	-74 dBm	13.21 V
1787502759	13 Pkt	2 Pkt	-75 dBm	13.06 V
1787499131	13 Pkt	4 Pkt	-74 dBm	13.06 V
1787495504	11 Pkt	1 Pkt	-74 dBm	13.1 V
1787491877	6 Pkt	1 Pkt	-74 dBm	13 V
1787488250	18 Pkt	0 Pkt	-75 dBm	13.06 V
1787484622	36 Pkt	1 Pkt	-75 dBm	13.04 V
1787480994	14 Pkt	1 Pkt	-73 dBm	13.04 V
1787477366	11 Pkt	1 Pkt	-75 dBm	13.04 V
1787473740	6 Pkt	1 Pkt	-75 dBm	13.04 V
1787470112	11 Pkt	2 Pkt	-74 dBm	13.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)