KB7DWO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KB7DWO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	DigiRpt*	RFiGate*	Temp*	V1*
1773268222	8 Pkts	25 Pkts	45 C	0.2 V
1773264622	5 Pkts	13 Pkts	43 C	0.2 V
1773261022	5 Pkts	12 Pkts	40 C	0.2 V
1773257421	2 Pkts	10 Pkts	37 C	0.2 V
1773253821	31 Pkts	37 Pkts	34 C	0.2 V
1773250221	9 Pkts	19 Pkts	31 C	0.2 V
1773246622	4 Pkts	11 Pkts	29 C	0.2 V
1773243021	5 Pkts	13 Pkts	29 C	0.2 V
1773239422	65 Pkts	74 Pkts	29 C	0.2 V
1773235822	12 Pkts	20 Pkts	29 C	0.2 V
1773232222	11 Pkts	17 Pkts	30 C	0.2 V
1773228623	9 Pkts	17 Pkts	30 C	0.2 V
1773225023	6 Pkts	13 Pkts	31 C	0.2 V
1773221423	8 Pkts	15 Pkts	32 C	0.2 V
1773217821	6 Pkts	12 Pkts	34 C	0.2 V
1773214222	9 Pkts	16 Pkts	34 C	0.2 V
1773210627	4 Pkts	13 Pkts	35 C	0.2 V
1773207021	16 Pkts	24 Pkts	37 C	0.2 V
1773203421	3 Pkts	12 Pkts	38 C	0.2 V
1773199822	6 Pkts	15 Pkts	39 C	0.2 V
1773196221	10 Pkts	18 Pkts	41 C	0.2 V
1773192622	6 Pkts	15 Pkts	44 C	0.2 V
1773185421	12 Pkts	32 Pkts	46 C	0.2 V
1773181821	8 Pkts	16 Pkts	45 C	0.2 V
1773178221	6 Pkts	21 Pkts	43 C	0.2 V

*Used Equation Coefficients:

DigiRpt: 0, 1, 0

RFiGate: 0, 1, 0

Temp: 0, 1, 0

V1: 0, 0.1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)