SR8DBN-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8DBN-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1773065620	4 Count	75 Count	3 Count	4.1 VDC
1773063809	1 Count	36 Count	1 Count	4.09 VDC
1773061998	282 Count	1021 Count	120 Count	4.1 VDC
1773060187	279 Count	979 Count	118 Count	4.1 VDC
1773058376	277 Count	937 Count	117 Count	4.1 VDC
1773056565	275 Count	896 Count	116 Count	4.11 VDC
1773054752	273 Count	850 Count	115 Count	4.1 VDC
1773052954	270 Count	799 Count	113 Count	4.11 VDC
1773051151	266 Count	748 Count	111 Count	4.1 VDC
1773049205	251 Count	692 Count	108 Count	4.1 VDC
1773047404	191 Count	637 Count	107 Count	4.1 VDC
1773045605	144 Count	582 Count	105 Count	4.1 VDC
1773043803	141 Count	527 Count	103 Count	4.1 VDC
1773042002	135 Count	480 Count	101 Count	4.09 VDC
1773040202	130 Count	428 Count	97 Count	4.1 VDC
1773038401	127 Count	360 Count	95 Count	4.09 VDC
1773036600	124 Count	317 Count	93 Count	4.09 VDC
1773034799	121 Count	313 Count	91 Count	4.09 VDC
1773032998	118 Count	309 Count	89 Count	4.09 VDC
1773031197	110 Count	299 Count	82 Count	4.09 VDC
1773029397	105 Count	293 Count	78 Count	4.09 VDC
1773027604	102 Count	289 Count	76 Count	4.1 VDC
1773025804	98 Count	284 Count	73 Count	4.09 VDC
1773024002	94 Count	279 Count	70 Count	4.09 VDC
1773022202	90 Count	274 Count	67 Count	4.09 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)