LU7HCN-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU7HCN-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Battery*	Charging/AC*	GPS+Sat*
1780801638	98 Percent	95 Charge/On/Off	95 Sats/On/Off
1780800683	98 Percent	95 Charge/On/Off	48 Sats/On/Off
1780800681	98 Percent	95 Charge/On/Off	2 Sats/On/Off
1780800557	98 Percent	95 Charge/On/Off	2 Sats/On/Off
1780783794	98 Percent	95 Charge/On/Off	2 Sats/On/Off
1780782834	98 Percent	95 Charge/On/Off	2 Sats/On/Off
1780781873	98 Percent	95 Charge/On/Off	2 Sats/On/Off
1780780973	98 Percent	95 Charge/On/Off	2 Sats/On/Off
1780780073	98 Percent	95 Charge/On/Off	2 Sats/On/Off
1780779173	98 Percent	95 Charge/On/Off	2 Sats/On/Off
1780778263	98 Percent	95 Charge/On/Off	2 Sats/On/Off
1780778263	98 Percent	95 Charge/On/Off	48 Sats/On/Off
1780778035	98 Percent	95 Charge/On/Off	48 Sats/On/Off
1780525969	99 Percent	95 Charge/On/Off	95 Sats/On/Off
1780525633	99 Percent	95 Charge/On/Off	95 Sats/On/Off
1780524733	99 Percent	95 Charge/On/Off	93 Sats/On/Off
1780523836	99 Percent	95 Charge/On/Off	95 Sats/On/Off
1780522924	99 Percent	95 Charge/On/Off	48 Sats/On/Off
1780522922	99 Percent	95 Charge/On/Off	2 Sats/On/Off
1780522751	99 Percent	95 Charge/On/Off	2 Sats/On/Off
1780514235	100 Percent	48 Charge/On/Off	95 Sats/On/Off

*Used Equation Coefficients:

Battery: 0, 1, 0

Charging/AC: 0, 1, 0

GPS+Sat: 0, 1, 0

Current: 0, 10, -1280

A5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)