DG2MCM-17 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG2MCM-17. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	UV-Index10	UVB2	UVC5	Counter*
1781526506	6 UVI	26 uW/cm2	17 uW/cm2	207 #
1781525905	6 UVI	26 uW/cm2	18 uW/cm2	206 #
1781524704	43 UVI	176 uW/cm2	181 uW/cm2	204 #
1781524103	43 UVI	176 uW/cm2	180 uW/cm2	203 #
1781523503	44 UVI	180 uW/cm2	177 uW/cm2	202 #
1781522903	44 UVI	182 uW/cm2	171 uW/cm2	201 #
1781522302	45 UVI	185 uW/cm2	168 uW/cm2	200 #
1781521702	45 UVI	186 uW/cm2	165 uW/cm2	199 #
1781521101	45 UVI	186 uW/cm2	167 uW/cm2	198 #
1781520501	45 UVI	184 uW/cm2	172 uW/cm2	197 #
1781519300	41 UVI	169 uW/cm2	179 uW/cm2	195 #
1781518699	39 UVI	160 uW/cm2	183 uW/cm2	194 #
1781518099	36 UVI	150 uW/cm2	183 uW/cm2	193 #
1781517498	33 UVI	138 uW/cm2	186 uW/cm2	192 #
1781516898	30 UVI	125 uW/cm2	188 uW/cm2	191 #
1781516297	27 UVI	111 uW/cm2	193 uW/cm2	190 #
1781515097	20 UVI	84 uW/cm2	204 uW/cm2	188 #
1781514496	18 UVI	76 uW/cm2	213 uW/cm2	187 #
1781513895	16 UVI	67 uW/cm2	212 uW/cm2	186 #
1781513295	14 UVI	58 uW/cm2	204 uW/cm2	185 #
1781512094	12 UVI	49 uW/cm2	210 uW/cm2	183 #
1781511494	10 UVI	44 uW/cm2	214 uW/cm2	182 #
1781510893	9 UVI	37 uW/cm2	223 uW/cm2	181 #
1781510312	7 UVI	31 uW/cm2	233 uW/cm2	180 #
1781509692	5 UVI	23 uW/cm2	240 uW/cm2	179 #

*Used Equation Coefficients:

UV-Index*10: 0, 1, 0

UVB*2: 0, 1, 0

UVC*5: 0, 1, 0

n/a: 0, 1, 0

Counter: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)