DL2TK-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL2TK-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1784590614	1014.3 hPa	14.5 C deg	1033.3 hPa	0 C deg
1784575981	1013 hPa	17.3 C deg	1031.8 hPa	0 C deg
1784568645	1012.8 hPa	19.5 C deg	1031.3 hPa	0 C deg
1784557662	1013.4 hPa	20.5 C deg	1032 hPa	0 C deg
1784554011	1013.5 hPa	19.4 C deg	1032.1 hPa	0 C deg
1784517403	1011.8 hPa	14.9 C deg	1030.6 hPa	0 C deg
1784510089	1011.6 hPa	15.1 C deg	1030.4 hPa	0 C deg
1784502764	1011.9 hPa	14.8 C deg	1030.8 hPa	0 C deg
1784499100	1011.7 hPa	14.2 C deg	1030.6 hPa	0 C deg
1784495440	1011.6 hPa	15 C deg	1030.4 hPa	0 C deg
1784475310	1009.6 hPa	21.5 C deg	1028 hPa	0 C deg
1784473483	1009.5 hPa	22 C deg	1027.8 hPa	0 C deg
1784458861	1009.7 hPa	19.3 C deg	1028.2 hPa	0 C deg
1784440552	1007.4 hPa	17.2 C deg	1026.1 hPa	0 C deg
1784433221	1007.3 hPa	14 C deg	1026.2 hPa	0 C deg
1784425898	1007 hPa	14.5 C deg	1025.8 hPa	0 C deg
1784378318	1005.6 hPa	20.7 C deg	1024 hPa	0 C deg
1784367339	1005.8 hPa	20.8 C deg	1024.1 hPa	0 C deg
1784358187	1005.9 hPa	18.4 C deg	1024.4 hPa	0 C deg
1784354528	1005.7 hPa	18.6 C deg	1024.2 hPa	0 C deg
1784345377	1005.3 hPa	18 C deg	1023.8 hPa	0 C deg
1784341716	1005.1 hPa	18.1 C deg	1023.6 hPa	0 C deg
1784339902	1005.2 hPa	18.1 C deg	1023.7 hPa	0 C deg
1784321587	1004.4 hPa	22.1 C deg	1022.7 hPa	0 C deg
1784310606	1002.4 hPa	25.4 C deg	1020.5 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)