DL2AOM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL2AOM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Charging/AC*	GPS+Sat*
1788583341	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1788582441	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1788581541	100 Percent	48 Charge/On/Off	2 Sats/On/Off
1788539070	83 Percent	95 Charge/On/Off	2 Sats/On/Off
1788538950	82 Percent	95 Charge/On/Off	2 Sats/On/Off
1788538710	79 Percent	95 Charge/On/Off	2 Sats/On/Off
1788538650	78 Percent	95 Charge/On/Off	2 Sats/On/Off
1788538470	75 Percent	95 Charge/On/Off	2 Sats/On/Off
1788538410	74 Percent	95 Charge/On/Off	2 Sats/On/Off
1788538170	70 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537930	66 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537870	65 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537690	62 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537630	61 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537571	60 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537450	58 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537390	57 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537330	56 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537270	55 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537150	53 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537030	51 Percent	95 Charge/On/Off	2 Sats/On/Off
1788537013	49 Percent	95 Charge/On/Off	2 Sats/On/Off
1788536971	50 Percent	95 Charge/On/Off	2 Sats/On/Off
1788536910	49 Percent	95 Charge/On/Off	2 Sats/On/Off
1788536670	45 Percent	95 Charge/On/Off	2 Sats/On/Off

*Used Equation Coefficients:

Battery: 0, 1, 0

Charging/AC: 0, 1, 0

GPS+Sat: 0, 1, 0

Current: 0, 10, -1280

A5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)