W4AD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W4AD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1765604306	0.06 Rx Erlang	0.02 Tx Erlang	62 count/10m	0 count/10m	17 count/10m
1765603106	0.07 Rx Erlang	0.02 Tx Erlang	68 count/10m	0 count/10m	21 count/10m
1765601906	0.07 Rx Erlang	0.02 Tx Erlang	70 count/10m	0 count/10m	20 count/10m
1765600706	0.08 Rx Erlang	0.02 Tx Erlang	79 count/10m	0 count/10m	20 count/10m
1765599506	0.05 Rx Erlang	0.01 Tx Erlang	41 count/10m	0 count/10m	12 count/10m
1765598306	0.07 Rx Erlang	0.02 Tx Erlang	35 count/10m	0 count/10m	9 count/10m
1765597106	0.06 Rx Erlang	0.02 Tx Erlang	57 count/10m	0 count/10m	16 count/10m
1765595906	0.07 Rx Erlang	0.02 Tx Erlang	70 count/10m	13 count/10m	19 count/10m
1765594706	0.07 Rx Erlang	0.02 Tx Erlang	62 count/10m	1 count/10m	19 count/10m
1765593506	0.08 Rx Erlang	0.02 Tx Erlang	70 count/10m	0 count/10m	19 count/10m
1765592306	0.06 Rx Erlang	0.02 Tx Erlang	56 count/10m	0 count/10m	17 count/10m
1765591106	0.06 Rx Erlang	0.02 Tx Erlang	29 count/10m	0 count/10m	9 count/10m
1765589906	0.08 Rx Erlang	0.02 Tx Erlang	78 count/10m	2 count/10m	24 count/10m
1765588706	0.06 Rx Erlang	0.02 Tx Erlang	60 count/10m	9 count/10m	17 count/10m
1765587505	0.06 Rx Erlang	0.01 Tx Erlang	56 count/10m	0 count/10m	14 count/10m
1765586306	0.06 Rx Erlang	0.02 Tx Erlang	55 count/10m	0 count/10m	17 count/10m
1765585106	0.07 Rx Erlang	0.02 Tx Erlang	68 count/10m	2 count/10m	15 count/10m
1765583905	0.07 Rx Erlang	0.02 Tx Erlang	70 count/10m	1 count/10m	21 count/10m
1765582706	0.08 Rx Erlang	0.02 Tx Erlang	73 count/10m	3 count/10m	22 count/10m
1765581506	0.06 Rx Erlang	0.02 Tx Erlang	55 count/10m	1 count/10m	15 count/10m
1765580305	0.05 Rx Erlang	0.02 Tx Erlang	27 count/10m	1 count/10m	9 count/10m
1765579106	0.06 Rx Erlang	0.02 Tx Erlang	62 count/10m	0 count/10m	20 count/10m
1765577906	0.08 Rx Erlang	0.02 Tx Erlang	69 count/10m	4 count/10m	20 count/10m
1765576706	0.07 Rx Erlang	0.02 Tx Erlang	72 count/10m	3 count/10m	17 count/10m
1765575506	0.08 Rx Erlang	0.02 Tx Erlang	74 count/10m	11 count/10m	25 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)