DL2YED-99 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL2YED-99. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1787577889	1012.5 hPa	22.9 C deg	31.1 %	1020.9 hPa	0 C deg
1787574226	1013.2 hPa	22.1 C deg	32.6 %	1021.7 hPa	0 C deg
1787561421	1015.2 hPa	21.7 C deg	35.1 %	1023.7 hPa	0 C deg
1787559587	1015.3 hPa	21.5 C deg	35.6 %	1023.8 hPa	0 C deg
1787554110	1015.5 hPa	20.9 C deg	34.7 %	1024 hPa	0 C deg
1787533970	1015.7 hPa	21.1 C deg	36 %	1024.2 hPa	0 C deg
1787532145	1015.8 hPa	21.2 C deg	36.1 %	1024.3 hPa	0 C deg
1787528480	1015.9 hPa	21.6 C deg	36.2 %	1024.4 hPa	0 C deg
1787524821	1016.2 hPa	21.9 C deg	36.2 %	1024.6 hPa	0 C deg
1787510183	1015.3 hPa	23.1 C deg	36 %	1023.8 hPa	0 C deg
1787508349	1015.3 hPa	23.3 C deg	35.7 %	1023.7 hPa	0 C deg
1787497374	1015.5 hPa	23.8 C deg	39.1 %	1024 hPa	0 C deg
1787486391	1016.3 hPa	21.9 C deg	40.5 %	1024.8 hPa	0 C deg
1787462613	1015.8 hPa	20.9 C deg	35.7 %	1024.3 hPa	0 C deg
1787462613	1015.8 hPa	20.9 C deg	35.7 %	1024.3 hPa	0 C deg
1787458943	1015.3 hPa	20.8 C deg	35.5 %	1023.8 hPa	0 C deg
1787458942	1015.3 hPa	20.8 C deg	35.5 %	1023.8 hPa	0 C deg
1787457116	1015 hPa	20.9 C deg	35.3 %	1023.5 hPa	0 C deg
1787457116	1015 hPa	20.9 C deg	35.3 %	1023.5 hPa	0 C deg
1787455286	1015 hPa	21 C deg	35.2 %	1023.5 hPa	0 C deg
1787455286	1015 hPa	21 C deg	35.2 %	1023.5 hPa	0 C deg
1787444304	1014.6 hPa	21.7 C deg	35 %	1023.1 hPa	0 C deg
1787444304	1014.6 hPa	21.7 C deg	35 %	1023.1 hPa	0 C deg
1787440645	1014.8 hPa	22 C deg	34.9 %	1023.3 hPa	0 C deg
1787440645	1014.8 hPa	22 C deg	34.9 %	1023.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)