ELKGRV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ELKGRV. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*
1785317771	13.8 Volt	330 Pkt	80 Pcnt
1785314171	13.8 Volt	340 Pkt	80 Pcnt
1785310571	13.8 Volt	330 Pkt	79 Pcnt
1785306971	13.8 Volt	340 Pkt	80 Pcnt
1785303371	13.8 Volt	340 Pkt	75 Pcnt
1785299771	13.8 Volt	590 Pkt	76 Pcnt
1785296171	13.8 Volt	510 Pkt	83 Pcnt
1785292572	13.8 Volt	490 Pkt	79 Pcnt
1785292571	13.8 Volt	490 Pkt	79 Pcnt
1785288971	13.8 Volt	640 Pkt	68 Pcnt
1785285371	13.8 Volt	580 Pkt	73 Pcnt
1785281771	13.8 Volt	460 Pkt	72 Pcnt
1785278171	13.8 Volt	450 Pkt	74 Pcnt
1785274571	13.8 Volt	470 Pkt	82 Pcnt
1785270972	13.8 Volt	230 Pkt	68 Pcnt
1785267372	13.8 Volt	130 Pkt	43 Pcnt
1785263772	13.8 Volt	240 Pkt	64 Pcnt
1785260172	13.8 Volt	280 Pkt	75 Pcnt
1785256572	13.8 Volt	410 Pkt	79 Pcnt
1785252972	13.8 Volt	480 Pkt	77 Pcnt
1785249373	13.8 Volt	420 Pkt	82 Pcnt
1785249372	13.8 Volt	420 Pkt	82 Pcnt
1785245772	13.8 Volt	310 Pkt	79 Pcnt
1785242172	13.8 Volt	300 Pkt	86 Pcnt
1785238572	13.8 Volt	290 Pkt	81 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)