SR9WXY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9WXY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	HostTx10m*	Tempre*
1780624792	76 Pkt	6 Pkt	4 Pkt	0 Pkt	28.5 DegC
1780623972	77 Pkt	5 Pkt	2 Pkt	0 Pkt	28.5 DegC
1780623372	82 Pkt	11 Pkt	9 Pkt	0 Pkt	28.5 DegC
1780622772	74 Pkt	9 Pkt	6 Pkt	0 Pkt	28.5 DegC
1780622172	80 Pkt	2 Pkt	0 Pkt	0 Pkt	28.5 DegC
1780621572	79 Pkt	6 Pkt	3 Pkt	0 Pkt	28.5 DegC
1780620973	62 Pkt	6 Pkt	3 Pkt	0 Pkt	28.5 DegC
1780620373	77 Pkt	3 Pkt	1 Pkt	0 Pkt	28.5 DegC
1780619772	73 Pkt	6 Pkt	3 Pkt	0 Pkt	28.5 DegC
1780619170	68 Pkt	4 Pkt	2 Pkt	0 Pkt	28.5 DegC
1780618570	77 Pkt	4 Pkt	1 Pkt	0 Pkt	28.5 DegC
1780617969	58 Pkt	10 Pkt	3 Pkt	0 Pkt	28.5 DegC
1780617358	53 Pkt	3 Pkt	1 Pkt	0 Pkt	28.5 DegC
1780616758	-	-	-	-	-
1780616758	76 Pkt	4 Pkt	2 Pkt	0 Pkt	28.5 DegC
1780616157	57 Pkt	5 Pkt	2 Pkt	0 Pkt	28.5 DegC
1780615558	48 Pkt	3 Pkt	1 Pkt	0 Pkt	28.5 DegC
1780614958	62 Pkt	4 Pkt	1 Pkt	0 Pkt	28.5 DegC
1780614359	54 Pkt	6 Pkt	3 Pkt	0 Pkt	28.5 DegC
1780613758	73 Pkt	4 Pkt	2 Pkt	0 Pkt	28.5 DegC
1780613158	53 Pkt	4 Pkt	1 Pkt	0 Pkt	28.5 DegC
1780612555	62 Pkt	4 Pkt	2 Pkt	0 Pkt	28.5 DegC
1780611956	50 Pkt	3 Pkt	1 Pkt	0 Pkt	28.5 DegC
1780611353	71 Pkt	4 Pkt	2 Pkt	0 Pkt	28.5 DegC
1780610753	83 Pkt	11 Pkt	7 Pkt	0 Pkt	28.5 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)