EL-W8PAR Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-W8PAR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value3*
1784673280	21	2
1784672680	30	4
1784672080	0	0
1784671480	30	1
1784670880	189	26
1784670280	557	24
1784669680	321	18
1784669080	263	14
1784668480	14	3
1784667880	58	6
1784667280	310	21
1784666680	572	32
1784666080	36	12
1784665480	40	3
1784664880	35	17
1784664280	59	12
1784663680	41	7
1784663080	12	1
1784662480	43	5
1784661880	0	0
1784661280	0	0
1784660680	44	4
1784660080	0	0
1784659495	0	0
1784658880	40	7

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)