Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object TA3LG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* RSSI* Voltage*
1781396925 0 Pkt 11 Pkt 0 Pkt -59 dBm 1.23 V
1781391892 0 Pkt 218 Pkt 0 Pkt -64 dBm 1.23 V
1781390659 0 Pkt 202 Pkt 0 Pkt -64 dBm 1.23 V
1781389425 0 Pkt 231 Pkt 0 Pkt -62 dBm 1.23 V
1781388192 0 Pkt 248 Pkt 0 Pkt -63 dBm 1.23 V
1781386956 0 Pkt 268 Pkt 0 Pkt -64 dBm 1.23 V
1781385723 0 Pkt 243 Pkt 0 Pkt -64 dBm 1.23 V
1781384486 0 Pkt 235 Pkt 0 Pkt -64 dBm 1.23 V
1781383250 0 Pkt 249 Pkt 0 Pkt -64 dBm 1.23 V
1781382014 0 Pkt 253 Pkt 0 Pkt -64 dBm 1.23 V
1781380779 0 Pkt 232 Pkt 0 Pkt -64 dBm 1.23 V
1781379546 0 Pkt 264 Pkt 0 Pkt -63 dBm 1.23 V
1781378311 0 Pkt 262 Pkt 0 Pkt -62 dBm 1.23 V
1781377074 0 Pkt 233 Pkt 0 Pkt -63 dBm 1.23 V
1781375840 0 Pkt 231 Pkt 0 Pkt -64 dBm 1.23 V
1781374605 0 Pkt 265 Pkt 0 Pkt -63 dBm 1.23 V
1781373368 0 Pkt 230 Pkt 0 Pkt -61 dBm 1.23 V
1781372133 0 Pkt 256 Pkt 0 Pkt -67 dBm 1.23 V
1781370899 0 Pkt 240 Pkt 0 Pkt -63 dBm 1.23 V
1781369663 0 Pkt 235 Pkt 0 Pkt -66 dBm 1.23 V
1781368426 0 Pkt 275 Pkt 0 Pkt -65 dBm 1.23 V
1781367189 0 Pkt 282 Pkt 0 Pkt -65 dBm 1.23 V
1781365954 0 Pkt 269 Pkt 0 Pkt -65 dBm 1.23 V
1781364716 0 Pkt 284 Pkt 0 Pkt -64 dBm 1.23 V
1781363481 0 Pkt 273 Pkt 0 Pkt -65 dBm 1.23 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)