DL1LAA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL1LAA-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1772661961	1028.6 hPa	26.9 C deg	1035.2 hPa	0 C deg
1772660141	1028.7 hPa	25.1 C deg	1035.4 hPa	0 C deg
1772658322	1028.8 hPa	24.8 C deg	1035.6 hPa	0 C deg
1772656501	1028.9 hPa	24.3 C deg	1035.6 hPa	0 C deg
1772654681	1028.9 hPa	24.4 C deg	1035.6 hPa	0 C deg
1772651041	1028.9 hPa	24.4 C deg	1035.6 hPa	0 C deg
1772647401	1028.9 hPa	25.2 C deg	1035.6 hPa	0 C deg
1772645581	1029 hPa	24.9 C deg	1035.7 hPa	0 C deg
1772643765	1028.9 hPa	25.2 C deg	1035.6 hPa	0 C deg
1772641941	1029 hPa	26 C deg	1035.7 hPa	0 C deg
1772640121	1029.1 hPa	26.4 C deg	1035.8 hPa	0 C deg
1772638302	1029.3 hPa	26.3 C deg	1036 hPa	0 C deg
1772636481	1029.4 hPa	26.9 C deg	1036.1 hPa	0 C deg
1772634661	1029.6 hPa	28.6 C deg	1036.3 hPa	0 C deg
1772632841	1029.7 hPa	31.3 C deg	1036.3 hPa	0 C deg
1772631021	1029.8 hPa	32.8 C deg	1036.4 hPa	0 C deg
1772629201	1030.1 hPa	33.4 C deg	1036.7 hPa	0 C deg
1772627381	1030.4 hPa	33.4 C deg	1037 hPa	0 C deg
1772625561	1030.7 hPa	32.4 C deg	1037.3 hPa	0 C deg
1772623741	1030.8 hPa	29.8 C deg	1037.4 hPa	0 C deg
1772621921	1031.2 hPa	25 C deg	1037.9 hPa	0 C deg
1772620107	1031.2 hPa	24.5 C deg	1038 hPa	0 C deg
1772618291	1031.2 hPa	24.4 C deg	1038 hPa	0 C deg
1772616478	1031.1 hPa	24.3 C deg	1037.9 hPa	0 C deg
1772614662	1031.1 hPa	24.1 C deg	1037.9 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)