TA4IB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA4IB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1787575817	102 Pkt	7 Pkt	-37 dBm	0.31 V
1787573086	101 Pkt	14 Pkt	-37 dBm	0.31 V
1787570347	139 Pkt	6 Pkt	-44 dBm	0.33 V
1787567618	95 Pkt	7 Pkt	-42 dBm	0.31 V
1787564886	62 Pkt	6 Pkt	-42 dBm	0.31 V
1787562154	59 Pkt	6 Pkt	-42 dBm	0.31 V
1787559425	62 Pkt	6 Pkt	-43 dBm	0.31 V
1787556694	56 Pkt	6 Pkt	-42 dBm	0.31 V
1787553966	74 Pkt	7 Pkt	-42 dBm	0.31 V
1787551235	51 Pkt	6 Pkt	-42 dBm	0.31 V
1787548504	62 Pkt	6 Pkt	-43 dBm	0.31 V
1787545773	65 Pkt	12 Pkt	-43 dBm	0.31 V
1787543037	65 Pkt	7 Pkt	-43 dBm	0.31 V
1787540305	68 Pkt	8 Pkt	-43 dBm	0.31 V
1787537573	61 Pkt	6 Pkt	-43 dBm	0.31 V
1787534845	59 Pkt	6 Pkt	-44 dBm	0.31 V
1787532115	65 Pkt	6 Pkt	-43 dBm	0.31 V
1787529386	55 Pkt	6 Pkt	-44 dBm	0.31 V
1787526654	62 Pkt	6 Pkt	-43 dBm	0.31 V
1787523924	62 Pkt	6 Pkt	-43 dBm	0.31 V
1787521194	53 Pkt	6 Pkt	-43 dBm	0.31 V
1787518464	53 Pkt	6 Pkt	-43 dBm	0.31 V
1787515734	62 Pkt	6 Pkt	-43 dBm	0.35 V
1787513004	79 Pkt	6 Pkt	-43 dBm	0.31 V
1787510273	90 Pkt	9 Pkt	-44 dBm	0.41 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)