KL3RR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KL3RR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1787616840	12.38 volt	190 Pkt	10 Pkt	86 Pcnt	22 degC
1787615040	12.45 volt	250 Pkt	10 Pkt	86 Pcnt	22 degC
1787613240	12.45 volt	270 Pkt	10 Pkt	88 Pcnt	22 degC
1787611440	12.45 volt	220 Pkt	10 Pkt	85 Pcnt	21.5 degC
1787609640	12.45 volt	260 Pkt	10 Pkt	85 Pcnt	22 degC
1787607840	12.45 volt	300 Pkt	10 Pkt	89 Pcnt	21.5 degC
1787606040	12.45 volt	250 Pkt	10 Pkt	89 Pcnt	21.5 degC
1787604240	12.45 volt	220 Pkt	10 Pkt	87 Pcnt	21.5 degC
1787602440	12.45 volt	220 Pkt	10 Pkt	88 Pcnt	21.5 degC
1787600640	12.45 volt	240 Pkt	10 Pkt	90 Pcnt	21.5 degC
1787598840	12.45 volt	250 Pkt	10 Pkt	87 Pcnt	21.5 degC
1787597040	12.45 volt	230 Pkt	10 Pkt	86 Pcnt	21.5 degC
1787595241	12.45 volt	230 Pkt	10 Pkt	90 Pcnt	21.5 degC
1787593440	12.45 volt	220 Pkt	10 Pkt	89 Pcnt	21.5 degC
1787591640	12.45 volt	220 Pkt	10 Pkt	90 Pcnt	21.5 degC
1787589840	12.45 volt	220 Pkt	10 Pkt	88 Pcnt	21.5 degC
1787588041	12.45 volt	220 Pkt	10 Pkt	83 Pcnt	21.5 degC
1787586241	12.45 volt	260 Pkt	10 Pkt	89 Pcnt	21.5 degC
1787584441	12.45 volt	280 Pkt	10 Pkt	93 Pcnt	21.5 degC
1787582641	12.45 volt	240 Pkt	10 Pkt	92 Pcnt	21.5 degC
1787580841	12.45 volt	240 Pkt	10 Pkt	94 Pcnt	21.5 degC
1787579041	12.45 volt	250 Pkt	10 Pkt	95 Pcnt	21.5 degC
1787577241	12.45 volt	250 Pkt	10 Pkt	95 Pcnt	21.5 degC
1787575441	12.45 volt	220 Pkt	10 Pkt	89 Pcnt	22 degC
1787573641	12.45 volt	220 Pkt	10 Pkt	88 Pcnt	22 degC

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)