HS6PAU-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6PAU-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1773317710	26 ug/m3	39 ug/m3	47 ug/m3	-48 dBm	0.16 V
1773317373	27 ug/m3	39 ug/m3	45 ug/m3	-46 dBm	0.18 V
1773317051	24 ug/m3	36 ug/m3	41 ug/m3	-47 dBm	0.16 V
1773316729	25 ug/m3	36 ug/m3	43 ug/m3	-49 dBm	0.12 V
1773316407	25 ug/m3	36 ug/m3	42 ug/m3	-48 dBm	0.18 V
1773316084	23 ug/m3	33 ug/m3	36 ug/m3	-46 dBm	0.45 V
1773315762	25 ug/m3	35 ug/m3	39 ug/m3	-50 dBm	1.15 V
1773315440	24 ug/m3	36 ug/m3	42 ug/m3	-52 dBm	2.58 V
1773315118	24 ug/m3	35 ug/m3	39 ug/m3	-50 dBm	5.13 V
1773314796	24 ug/m3	35 ug/m3	39 ug/m3	-51 dBm	8.31 V
1773314474	23 ug/m3	34 ug/m3	38 ug/m3	-47 dBm	12 V
1773314152	23 ug/m3	37 ug/m3	44 ug/m3	-48 dBm	14.81 V
1773313830	25 ug/m3	35 ug/m3	43 ug/m3	-51 dBm	16.32 V
1773313508	23 ug/m3	34 ug/m3	38 ug/m3	-53 dBm	17.55 V
1773313185	22 ug/m3	33 ug/m3	37 ug/m3	-50 dBm	18.38 V
1773312864	26 ug/m3	35 ug/m3	39 ug/m3	-48 dBm	19.01 V
1773312541	24 ug/m3	35 ug/m3	40 ug/m3	-50 dBm	19.5 V
1773312219	25 ug/m3	35 ug/m3	43 ug/m3	-48 dBm	20.26 V
1773311897	23 ug/m3	33 ug/m3	35 ug/m3	-49 dBm	21 V
1773311560	25 ug/m3	37 ug/m3	42 ug/m3	-54 dBm	21 V
1773311353	23 ug/m3	33 ug/m3	36 ug/m3	-48 dBm	21 V
1773311031	24 ug/m3	35 ug/m3	40 ug/m3	-48 dBm	21 V
1773310709	23 ug/m3	35 ug/m3	39 ug/m3	-52 dBm	21 V
1773310386	24 ug/m3	34 ug/m3	39 ug/m3	-52 dBm	21 V
1773310064	24 ug/m3	34 ug/m3	37 ug/m3	-50 dBm	21 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)