HS5SQI-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5SQI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1765544907	13 Pkt	1 Pkt	0 Pkt	-70 dBm	16.9 V
1765544282	10 Pkt	0 Pkt	0 Pkt	-71 dBm	16.67 V
1765543657	13 Pkt	0 Pkt	0 Pkt	-71 dBm	16.67 V
1765542406	21 Pkt	0 Pkt	0 Pkt	-71 dBm	16.82 V
1765541781	22 Pkt	1 Pkt	0 Pkt	-70 dBm	16.43 V
1765541155	19 Pkt	1 Pkt	0 Pkt	-71 dBm	17.06 V
1765540529	15 Pkt	0 Pkt	0 Pkt	-71 dBm	16.65 V
1765539905	18 Pkt	0 Pkt	0 Pkt	-74 dBm	16.61 V
1765539280	11 Pkt	1 Pkt	0 Pkt	-72 dBm	16.82 V
1765538656	8 Pkt	0 Pkt	0 Pkt	-73 dBm	16.73 V
1765538032	6 Pkt	1 Pkt	0 Pkt	-72 dBm	16.73 V
1765537409	3 Pkt	0 Pkt	0 Pkt	-73 dBm	17.02 V
1765536786	8 Pkt	3 Pkt	1 Pkt	-73 dBm	16.84 V
1765536162	9 Pkt	1 Pkt	0 Pkt	-72 dBm	17.23 V
1765535536	20 Pkt	2 Pkt	1 Pkt	-70 dBm	16.84 V
1765534908	12 Pkt	0 Pkt	0 Pkt	-70 dBm	17.12 V
1765534285	15 Pkt	1 Pkt	0 Pkt	-70 dBm	16.84 V
1765533657	18 Pkt	2 Pkt	0 Pkt	-70 dBm	16.84 V
1765533032	6 Pkt	0 Pkt	0 Pkt	-70 dBm	16.67 V
1765532408	13 Pkt	0 Pkt	1 Pkt	-71 dBm	17.1 V
1765531783	3 Pkt	1 Pkt	0 Pkt	-70 dBm	16.82 V
1765531160	1 Pkt	1 Pkt	0 Pkt	-71 dBm	16.8 V
1765530538	4 Pkt	2 Pkt	0 Pkt	-70 dBm	16.8 V
1765529915	0 Pkt	0 Pkt	0 Pkt	-71 dBm	16.73 V
1765529293	0 Pkt	0 Pkt	0 Pkt	-71 dBm	16.92 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)