SQ8SJ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ8SJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1780977005	21 Deg.C	1 %
1780976402	20 Deg.C	1 %
1780975805	18 Deg.C	1 %
1780975202	19 Deg.C	1 %
1780974601	17 Deg.C	1 %
1780974005	18 Deg.C	1 %
1780973402	17 Deg.C	1 %
1780971605	17 Deg.C	1 %
1780971002	17 Deg.C	1 %
1780970401	17 Deg.C	1 %
1780969806	18 Deg.C	1 %
1780969201	18 Deg.C	1 %
1780968605	18 Deg.C	1 %
1780968001	18 Deg.C	1 %
1780967405	17 Deg.C	1 %
1780966802	17 Deg.C	1 %
1780966201	17 Deg.C	1 %
1780965605	18 Deg.C	1 %
1780965001	18 Deg.C	1 %
1780964405	17 Deg.C	1 %
1780963802	18 Deg.C	1 %
1780963206	18 Deg.C	1 %
1780962601	18 Deg.C	1 %
1780962005	19 Deg.C	1 %
1780960805	17 Deg.C	1 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)