DL2YED-98 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL2YED-98. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1772499757	1015.5 hPa	15.1 C deg	41.8 %	1023.9 hPa	0 C deg
1772461642	1012.6 hPa	17.6 C deg	42.7 %	1020.9 hPa	0 C deg
1772461642	1012.6 hPa	17.6 C deg	42.7 %	1020.9 hPa	0 C deg
1772441644	1014.2 hPa	13.7 C deg	45.1 %	1022.7 hPa	0 C deg
1772438013	1014 hPa	13.5 C deg	43.1 %	1022.4 hPa	0 C deg
1772432564	1013.6 hPa	13.3 C deg	43.5 %	1022.1 hPa	0 C deg
1772430753	1013.5 hPa	13.4 C deg	43.6 %	1022 hPa	0 C deg
1772427128	1013.6 hPa	13.5 C deg	43.6 %	1022.1 hPa	0 C deg
1772419865	1013.8 hPa	13.9 C deg	43.8 %	1022.3 hPa	0 C deg
1772414403	1014.2 hPa	14.4 C deg	43.9 %	1022.7 hPa	0 C deg
1772412587	1014.2 hPa	14.5 C deg	43.9 %	1022.6 hPa	0 C deg
1772407145	1014.2 hPa	14.7 C deg	44.1 %	1022.6 hPa	0 C deg
1772403506	1014.3 hPa	14.9 C deg	44.3 %	1022.7 hPa	0 C deg
1772381713	1013.5 hPa	16.8 C deg	44.8 %	1021.9 hPa	0 C deg
1772372633	1014.3 hPa	16 C deg	46.6 %	1022.7 hPa	0 C deg
1772362629	1015.7 hPa	14.3 C deg	48.4 %	1024.2 hPa	0 C deg
1772331757	1015.5 hPa	13.9 C deg	48 %	1023.9 hPa	0 C deg
1772291804	1009.9 hPa	15.8 C deg	49.2 %	1018.3 hPa	0 C deg
1772279099	1008.7 hPa	15.8 C deg	48.7 %	1017 hPa	0 C deg
1772277276	1008.6 hPa	15.8 C deg	48.8 %	1017 hPa	0 C deg
1772266388	1008.9 hPa	15 C deg	50 %	1017.3 hPa	0 C deg
1772259115	1008.1 hPa	15.3 C deg	50.6 %	1016.5 hPa	0 C deg
1772257299	1007.8 hPa	15.4 C deg	50.7 %	1016.1 hPa	0 C deg
1772244586	1007.4 hPa	15.6 C deg	50.9 %	1015.8 hPa	0 C deg
1772168311	1009.3 hPa	14.4 C deg	52.7 %	1017.7 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)