E25XKG-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E25XKG-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1*	PM2.5*	PM10*	AQI*	CPU-T*
1776702627	34 ug/m3	52 ug/m3	64 ug/m3	141 index	44 C
1776702326	34 ug/m3	52 ug/m3	64 ug/m3	141 index	45 C
1776702025	35 ug/m3	52 ug/m3	64 ug/m3	141 index	44 C
1776701724	35 ug/m3	52 ug/m3	64 ug/m3	141 index	45 C
1776701423	34 ug/m3	51 ug/m3	64 ug/m3	139 index	47 C
1776701122	34 ug/m3	51 ug/m3	64 ug/m3	139 index	45 C
1776700822	34 ug/m3	51 ug/m3	64 ug/m3	139 index	47 C
1776700521	35 ug/m3	52 ug/m3	65 ug/m3	141 index	46 C
1776700220	35 ug/m3	52 ug/m3	65 ug/m3	141 index	45 C
1776699919	35 ug/m3	52 ug/m3	64 ug/m3	141 index	46 C
1776699618	0 ug/m3	0 ug/m3	0 ug/m3	0 index	46 C
1776699317	25 ug/m3	37 ug/m3	44 ug/m3	104 index	45 C
1776699015	0 ug/m3	0 ug/m3	0 ug/m3	0 index	46 C
1776698715	26 ug/m3	39 ug/m3	45 ug/m3	109 index	46 C
1776698413	0 ug/m3	0 ug/m3	0 ug/m3	0 index	45 C
1776698112	25 ug/m3	38 ug/m3	44 ug/m3	107 index	46 C
1776697811	0 ug/m3	0 ug/m3	0 ug/m3	0 index	47 C
1776697510	25 ug/m3	38 ug/m3	44 ug/m3	107 index	45 C
1776697209	26 ug/m3	39 ug/m3	45 ug/m3	109 index	45 C
1776696908	26 ug/m3	39 ug/m3	45 ug/m3	109 index	46 C
1776696608	26 ug/m3	39 ug/m3	45 ug/m3	109 index	45 C
1776696306	25 ug/m3	38 ug/m3	45 ug/m3	107 index	46 C
1776696005	25 ug/m3	38 ug/m3	45 ug/m3	107 index	46 C
1776695704	25 ug/m3	38 ug/m3	45 ug/m3	107 index	46 C
1776695403	25 ug/m3	38 ug/m3	45 ug/m3	107 index	45 C

*Used Equation Coefficients:

PM1: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

AQI: 0, 1, 0

CPU-T: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)