DB1CC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB1CC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1773141282	962.3 hPa	20.8 C deg	36.5 %	47 -	0 C deg
1773139467	962.4 hPa	20.8 C deg	36.6 %	46 -	0 C deg
1773137654	962.5 hPa	20.8 C deg	36.5 %	43 -	0 C deg
1773135839	962.5 hPa	20.9 C deg	36.7 %	41 -	0 C deg
1773134024	962.5 hPa	21 C deg	37.4 %	38 -	0 C deg
1773132214	962.4 hPa	20.9 C deg	36.2 %	41 -	0 C deg
1773130394	962.5 hPa	21.1 C deg	36.1 %	40 -	0 C deg
1773128579	962.3 hPa	21 C deg	35.4 %	42 -	0 C deg
1773126764	962.2 hPa	20.4 C deg	36 %	42 -	0 C deg
1773126685	962.3 hPa	20.4 C deg	36 %	42 -	0 C deg
1773125967	962.2 hPa	19.5 C deg	37.2 %	44 -	0 C deg
1773124152	962.2 hPa	19.5 C deg	36.3 %	45 -	0 C deg
1773122337	962 hPa	19.5 C deg	36.3 %	45 -	0 C deg
1773120524	961.8 hPa	19.5 C deg	36.6 %	45 -	0 C deg
1773118709	961.9 hPa	19.6 C deg	36.7 %	45 -	0 C deg
1773116891	962 hPa	19.6 C deg	36.9 %	44 -	0 C deg
1773115921	962 hPa	19.7 C deg	37.1 %	44 -	0 C deg
1773114108	961.9 hPa	19.7 C deg	37.4 %	43 -	0 C deg
1773112293	961.9 hPa	19.8 C deg	37.7 %	41 -	0 C deg
1773110474	962 hPa	19.9 C deg	38.2 %	39 -	0 C deg
1773108659	962 hPa	19.9 C deg	39.2 %	38 -	0 C deg
1773106844	962.1 hPa	19.7 C deg	39.3 %	39 -	0 C deg
1773105029	962 hPa	19.6 C deg	39.1 %	41 -	0 C deg
1773103211	962.1 hPa	19.5 C deg	39.3 %	41 -	0 C deg
1773103085	962.1 hPa	19.5 C deg	39.3 %	41 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)