SP6RTS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6RTS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1780582306	0 Count	996 Count	0 Count	0 VDC	0 VDC
1780581404	0 Count	983 Count	0 Count	0 VDC	0 VDC
1780580502	0 Count	975 Count	0 Count	0 VDC	0 VDC
1780579599	0 Count	950 Count	0 Count	0 VDC	0 VDC
1780578697	0 Count	939 Count	0 Count	0 VDC	0 VDC
1780577795	0 Count	931 Count	0 Count	0 VDC	0 VDC
1780576893	0 Count	922 Count	0 Count	0 VDC	0 VDC
1780575990	0 Count	913 Count	0 Count	0 VDC	0 VDC
1780575088	0 Count	905 Count	0 Count	0 VDC	0 VDC
1780574186	0 Count	898 Count	0 Count	0 VDC	0 VDC
1780573284	0 Count	889 Count	0 Count	0 VDC	0 VDC
1780572381	0 Count	882 Count	0 Count	0 VDC	0 VDC
1780571479	0 Count	872 Count	0 Count	0 VDC	0 VDC
1780570577	0 Count	862 Count	0 Count	0 VDC	0 VDC
1780569675	0 Count	857 Count	0 Count	0 VDC	0 VDC
1780568772	0 Count	848 Count	0 Count	0 VDC	0 VDC
1780567870	0 Count	843 Count	0 Count	0 VDC	0 VDC
1780566968	0 Count	842 Count	0 Count	0 VDC	0 VDC
1780566118	0 Count	823 Count	0 Count	0 VDC	0 VDC
1780565216	0 Count	821 Count	0 Count	0 VDC	0 VDC
1780564314	0 Count	819 Count	0 Count	0 VDC	0 VDC
1780563412	0 Count	818 Count	0 Count	0 VDC	0 VDC
1780562510	0 Count	817 Count	0 Count	0 VDC	0 VDC
1780561608	0 Count	816 Count	0 Count	0 VDC	0 VDC
1780560705	0 Count	814 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)