HP1CDW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1CDW-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EffTo*
1788655676	15.01 Volt	290 Pkt	100 Pkt	73 Pcnt	72 Pcnt
1788655076	15.01 Volt	280 Pkt	100 Pkt	72 Pcnt	72 Pcnt
1788654481	15.01 Volt	250 Pkt	90 Pkt	71 Pcnt	72 Pcnt
1788653876	15.01 Volt	260 Pkt	90 Pkt	73 Pcnt	72 Pcnt
1788653276	15.01 Volt	260 Pkt	100 Pkt	74 Pcnt	72 Pcnt
1788652676	15.01 Volt	260 Pkt	100 Pkt	74 Pcnt	71 Pcnt
1788652076	15.01 Volt	260 Pkt	100 Pkt	75 Pcnt	72 Pcnt
1788651476	15.01 Volt	260 Pkt	100 Pkt	74 Pcnt	71 Pcnt
1788650877	15.01 Volt	250 Pkt	100 Pkt	75 Pcnt	72 Pcnt
1788650276	15.01 Volt	260 Pkt	90 Pkt	73 Pcnt	71 Pcnt
1788649676	14.69 Volt	260 Pkt	90 Pkt	73 Pcnt	71 Pcnt
1788649078	15.01 Volt	250 Pkt	80 Pkt	73 Pcnt	71 Pcnt
1788648476	15.01 Volt	250 Pkt	90 Pkt	71 Pcnt	71 Pcnt
1788647876	15.01 Volt	240 Pkt	80 Pkt	71 Pcnt	71 Pcnt
1788647277	15.01 Volt	230 Pkt	90 Pkt	73 Pcnt	71 Pcnt
1788646676	15.01 Volt	230 Pkt	80 Pkt	71 Pcnt	71 Pcnt
1788646076	15.01 Volt	220 Pkt	80 Pkt	70 Pcnt	71 Pcnt
1788645480	15.01 Volt	240 Pkt	90 Pkt	71 Pcnt	71 Pcnt
1788644876	14.77 Volt	240 Pkt	80 Pkt	72 Pcnt	71 Pcnt
1788644279	15.01 Volt	240 Pkt	80 Pkt	73 Pcnt	71 Pcnt
1788643678	15.01 Volt	260 Pkt	90 Pkt	73 Pcnt	71 Pcnt
1788643078	15.01 Volt	250 Pkt	80 Pkt	75 Pcnt	71 Pcnt
1788642476	15.01 Volt	270 Pkt	90 Pkt	75 Pcnt	71 Pcnt
1788641878	15.01 Volt	290 Pkt	110 Pkt	73 Pcnt	71 Pcnt
1788641276	15.01 Volt	320 Pkt	120 Pkt	74 Pcnt	71 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)