IQ5YG-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ5YG-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1772537044	980.8 hPa	19.5 C deg	53.9 %	1031.6 hPa	0 C deg
1772533385	980.7 hPa	19.5 C deg	53.9 %	1031.5 hPa	0 C deg
1772527931	980.8 hPa	19.5 C deg	53.9 %	1031.5 hPa	0 C deg
1772526133	980.6 hPa	19.5 C deg	53.8 %	1031.3 hPa	0 C deg
1772524347	980.5 hPa	19.5 C deg	53.8 %	1031.3 hPa	0 C deg
1772522495	980.3 hPa	19.5 C deg	53.8 %	1031.1 hPa	0 C deg
1772520727	980.2 hPa	19.5 C deg	53.9 %	1031 hPa	0 C deg
1772518869	980 hPa	19.5 C deg	53.8 %	1030.8 hPa	0 C deg
1772517063	979.9 hPa	19.5 C deg	53.8 %	1030.6 hPa	0 C deg
1772513415	979.8 hPa	19.5 C deg	53.7 %	1030.5 hPa	0 C deg
1772511621	979.5 hPa	19.5 C deg	53.7 %	1030.2 hPa	0 C deg
1772508042	979.3 hPa	19.5 C deg	53.7 %	1030 hPa	0 C deg
1772506191	979.1 hPa	19.5 C deg	53.6 %	1029.8 hPa	0 C deg
1772504368	979.2 hPa	19.5 C deg	53.6 %	1029.9 hPa	0 C deg
1772502527	979.3 hPa	19.5 C deg	53.5 %	1030 hPa	0 C deg
1772495283	979.4 hPa	19.5 C deg	53.3 %	1030.1 hPa	0 C deg
1772493463	979.4 hPa	19.5 C deg	53.3 %	1030.1 hPa	0 C deg
1772491642	979.3 hPa	19.5 C deg	53.2 %	1030 hPa	0 C deg
1772489833	979.3 hPa	19.5 C deg	53.2 %	1030 hPa	0 C deg
1772488026	979.1 hPa	19.5 C deg	53.1 %	1029.8 hPa	0 C deg
1772486222	979.4 hPa	19.5 C deg	53 %	1030.1 hPa	0 C deg
1772482574	979.1 hPa	19.5 C deg	52.8 %	1029.8 hPa	0 C deg
1772477141	978.6 hPa	19.5 C deg	52.6 %	1029.3 hPa	0 C deg
1772475314	978.5 hPa	19.5 C deg	52.6 %	1029.1 hPa	0 C deg
1772473498	978.3 hPa	19.5 C deg	52.6 %	1029 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)