SM7VQA-01 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SM7VQA-01. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1781886731	992.1 hPa	24 C deg	1018.8 hPa	0 C deg
1781846793	992.8 hPa	23 C deg	1019.6 hPa	0 C deg
1781841350	992.4 hPa	23 C deg	1019.1 hPa	0 C deg
1781839547	992.4 hPa	22.7 C deg	1019.2 hPa	0 C deg
1781835899	992.3 hPa	22.6 C deg	1019.1 hPa	0 C deg
1781832510	992.2 hPa	22.8 C deg	1019 hPa	0 C deg
1781828886	992.3 hPa	22.9 C deg	1019.1 hPa	0 C deg
1781827041	992.2 hPa	22.9 C deg	1019 hPa	0 C deg
1781823420	992.2 hPa	23 C deg	1018.9 hPa	0 C deg
1781821606	992.1 hPa	23 C deg	1018.8 hPa	0 C deg
1781819782	992 hPa	23 C deg	1018.7 hPa	0 C deg
1781817977	991.9 hPa	23 C deg	1018.7 hPa	0 C deg
1781814343	991.4 hPa	23 C deg	1018.1 hPa	0 C deg
1781812537	991.4 hPa	23 C deg	1018.1 hPa	0 C deg
1781808899	990.8 hPa	23 C deg	1017.6 hPa	0 C deg
1781805274	990.7 hPa	23 C deg	1017.4 hPa	0 C deg
1781796201	990.5 hPa	22.7 C deg	1017.2 hPa	0 C deg
1781781686	989.9 hPa	23 C deg	1016.6 hPa	0 C deg
1781774435	989.5 hPa	22.9 C deg	1016.2 hPa	0 C deg
1781761732	988.1 hPa	22.5 C deg	1014.8 hPa	0 C deg
1781754477	987.5 hPa	22.7 C deg	1014.2 hPa	0 C deg
1781749037	987.5 hPa	22.9 C deg	1014.1 hPa	0 C deg
1781747225	987.6 hPa	22.9 C deg	1014.2 hPa	0 C deg
1781745405	987.9 hPa	23 C deg	1014.6 hPa	0 C deg
1781741786	988.3 hPa	23.1 C deg	1015 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)