DF4FW-01 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF4FW-01. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1776598119	1019.8 hPa	20.3 C deg	52.6 %	1019.9 hPa	0 C deg
1776590850	1019.1 hPa	20.7 C deg	51 %	1019.2 hPa	0 C deg
1776581799	1018.6 hPa	20 C deg	51.7 %	1018.7 hPa	0 C deg
1776576352	1018.6 hPa	19.6 C deg	52 %	1018.8 hPa	0 C deg
1776565480	1019 hPa	19.9 C deg	52.4 %	1019.1 hPa	0 C deg
1776558167	1019.3 hPa	20.1 C deg	52.7 %	1019.5 hPa	0 C deg
1776534592	1019.4 hPa	20.1 C deg	54.9 %	1019.5 hPa	0 C deg
1776507566	1019.1 hPa	22.6 C deg	50.3 %	1019.3 hPa	0 C deg
1776507450	1019.1 hPa	22.9 C deg	47.3 %	1019.3 hPa	0 C deg
1776505840	1019.2 hPa	23.2 C deg	46.7 %	1019.4 hPa	0 C deg
1776504006	1019.4 hPa	23.3 C deg	46.4 %	1019.6 hPa	0 C deg
1776503637	1019.4 hPa	23.3 C deg	46.4 %	1019.6 hPa	0 C deg
1776501896	1019.2 hPa	23.4 C deg	46.5 %	1019.5 hPa	0 C deg
1776501795	1019.2 hPa	23.4 C deg	46.5 %	1019.5 hPa	0 C deg
1776501321	1019.2 hPa	23.3 C deg	46.7 %	1019.5 hPa	0 C deg
1776499501	1019.1 hPa	23.1 C deg	47.2 %	1019.3 hPa	0 C deg
1776499269	1019 hPa	23.1 C deg	47.2 %	1019.3 hPa	0 C deg
1776496966	1019 hPa	20.4 C deg	51.9 %	1019.3 hPa	0 C deg
1776496943	1019 hPa	20.4 C deg	51.9 %	1019.3 hPa	0 C deg
1776495129	1019 hPa	20.4 C deg	51.7 %	1019.2 hPa	0 C deg
1776492919	1019 hPa	20.3 C deg	51.4 %	1019.2 hPa	0 C deg
1776489404	1018.9 hPa	20.3 C deg	51.3 %	1019.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)