SP8QEO-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8QEO-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1784693842	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	1 count/10m	3 count/10m
1784692642	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	1 count/10m	4 count/10m
1784691442	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	1 count/10m	3 count/10m
1784690242	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	1 count/10m	4 count/10m
1784689042	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	1 count/10m	3 count/10m
1784687842	0 Rx Erlang	0.01 Tx Erlang	2 count/10m	0 count/10m	3 count/10m
1784686642	0 Rx Erlang	0.01 Tx Erlang	4 count/10m	1 count/10m	4 count/10m
1784685466	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	4 count/10m
1784684242	0 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	3 count/10m
1784683042	0 Rx Erlang	0.01 Tx Erlang	4 count/10m	1 count/10m	3 count/10m
1784681842	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	1 count/10m	4 count/10m
1784680642	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	0 count/10m	3 count/10m
1784679442	0 Rx Erlang	0.01 Tx Erlang	2 count/10m	0 count/10m	4 count/10m
1784678242	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	4 count/10m
1784677042	0 Rx Erlang	0.01 Tx Erlang	2 count/10m	0 count/10m	3 count/10m
1784675842	0 Rx Erlang	0.01 Tx Erlang	2 count/10m	0 count/10m	3 count/10m
1784674642	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	0 count/10m	4 count/10m
1784673442	0 Rx Erlang	0.01 Tx Erlang	2 count/10m	0 count/10m	3 count/10m
1784672242	0 Rx Erlang	0.01 Tx Erlang	2 count/10m	0 count/10m	3 count/10m
1784671042	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	4 count/10m
1784669842	0 Rx Erlang	0.01 Tx Erlang	1 count/10m	0 count/10m	3 count/10m
1784668642	0 Rx Erlang	0.01 Tx Erlang	1 count/10m	0 count/10m	3 count/10m
1784667442	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	4 count/10m
1784666242	0 Rx Erlang	0.01 Tx Erlang	2 count/10m	0 count/10m	3 count/10m
1784665042	0 Rx Erlang	0.01 Tx Erlang	2 count/10m	0 count/10m	3 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)