Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object YC1SDZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time Temp.* Humidity* Pressure* Satellite* Value5*
1773369031 36 °C 37 %RH 1002 hPa 9 Sat 0
1773367131 36 °C 38 %RH 1003 hPa 9 Sat 0
1773365231 35 °C 40 %RH 1003 hPa 9 Sat 0
1773363331 35 °C 42 %RH 1003 hPa 10 Sat 0
1773361432 34 °C 42 %RH 1003 hPa 9 Sat 0
1773359532 35 °C 41 %RH 1002 hPa 10 Sat 0
1773357633 35 °C 40 %RH 1002 hPa 9 Sat 0
1773355732 33 °C 44 %RH 1001 hPa 10 Sat 0
1773353832 34 °C 44 %RH 1001 hPa 10 Sat 0
1773351932 33 °C 45 %RH 1001 hPa 8 Sat 0
1773350034 34 °C 44 %RH 1001 hPa 10 Sat 0
1773349183 34 °C 43 %RH 1001 hPa 11 Sat 0
1773347283 34 °C 44 %RH 1001 hPa 10 Sat 0
1773345383 34 °C 43 %RH 1001 hPa 11 Sat 0
1773343484 34 °C 44 %RH 1001 hPa 11 Sat 0
1773341584 34 °C 43 %RH 1001 hPa 9 Sat 0
1773339684 35 °C 42 %RH 1002 hPa 8 Sat 0
1773337784 35 °C 42 %RH 1002 hPa 10 Sat 0
1773335884 35 °C 42 %RH 1002 hPa 9 Sat 0
1773333984 35 °C 42 %RH 1003 hPa 11 Sat 0
1773332086 35 °C 42 %RH 1003 hPa 11 Sat 0
1773330184 35 °C 42 %RH 1003 hPa 8 Sat 0
1773328285 36 °C 42 %RH 1003 hPa 10 Sat 0
1773326385 36 °C 40 %RH 1003 hPa 10 Sat 0
1773324485 36 °C 40 %RH 1002 hPa 10 Sat 0
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Satellite: 0, 1, 0
Value5: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)