W6CDO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W6CDO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1788576725	0.05 Rx Erlang	0.01 Tx Erlang	49 count/10m	4 count/10m	8 count/10m
1788575525	0.05 Rx Erlang	0.01 Tx Erlang	48 count/10m	0 count/10m	5 count/10m
1788574325	0.05 Rx Erlang	0.01 Tx Erlang	50 count/10m	9 count/10m	11 count/10m
1788573125	0.06 Rx Erlang	0.01 Tx Erlang	63 count/10m	17 count/10m	10 count/10m
1788571925	0.05 Rx Erlang	0.01 Tx Erlang	52 count/10m	7 count/10m	8 count/10m
1788570725	0.05 Rx Erlang	0.01 Tx Erlang	52 count/10m	10 count/10m	13 count/10m
1788569525	0.05 Rx Erlang	0 Tx Erlang	48 count/10m	1 count/10m	2 count/10m
1788568325	0.05 Rx Erlang	0.01 Tx Erlang	41 count/10m	5 count/10m	5 count/10m
1788567125	0.07 Rx Erlang	0.02 Tx Erlang	76 count/10m	11 count/10m	13 count/10m
1788565925	0.06 Rx Erlang	0.01 Tx Erlang	68 count/10m	1 count/10m	10 count/10m
1788564725	0.05 Rx Erlang	0.01 Tx Erlang	61 count/10m	2 count/10m	7 count/10m
1788563525	0.04 Rx Erlang	0.01 Tx Erlang	50 count/10m	1 count/10m	8 count/10m
1788562325	0.06 Rx Erlang	0.01 Tx Erlang	57 count/10m	5 count/10m	10 count/10m
1788561125	0.06 Rx Erlang	0.02 Tx Erlang	55 count/10m	10 count/10m	14 count/10m
1788559925	0.07 Rx Erlang	0.02 Tx Erlang	69 count/10m	11 count/10m	21 count/10m
1788558725	0.07 Rx Erlang	0.02 Tx Erlang	65 count/10m	18 count/10m	21 count/10m
1788557525	0.06 Rx Erlang	0.03 Tx Erlang	60 count/10m	14 count/10m	21 count/10m
1788556325	0.05 Rx Erlang	0.01 Tx Erlang	48 count/10m	1 count/10m	13 count/10m
1788555125	0.05 Rx Erlang	0.02 Tx Erlang	50 count/10m	2 count/10m	18 count/10m
1788553925	0.04 Rx Erlang	0.01 Tx Erlang	48 count/10m	3 count/10m	15 count/10m
1788552725	0.03 Rx Erlang	0.01 Tx Erlang	34 count/10m	1 count/10m	10 count/10m
1788551525	0.04 Rx Erlang	0.01 Tx Erlang	37 count/10m	0 count/10m	13 count/10m
1788550325	0.05 Rx Erlang	0.01 Tx Erlang	47 count/10m	2 count/10m	13 count/10m
1788549125	0.04 Rx Erlang	0.01 Tx Erlang	42 count/10m	2 count/10m	12 count/10m
1788547925	0.05 Rx Erlang	0.02 Tx Erlang	58 count/10m	7 count/10m	18 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)