DB1YAD-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB1YAD-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1772801848	1015.3 hPa	24.5 C deg	1018.9 hPa	0 C deg
1772800058	1015.4 hPa	24.6 C deg	1019 hPa	0 C deg
1772798229	1015.6 hPa	24.9 C deg	1019.2 hPa	0 C deg
1772792809	1015.8 hPa	22.9 C deg	1019.4 hPa	0 C deg
1772785502	1015.4 hPa	22 C deg	1019 hPa	0 C deg
1772783713	1015.2 hPa	21.3 C deg	1018.8 hPa	0 C deg
1772778261	1014.9 hPa	19.3 C deg	1018.6 hPa	0 C deg
1772776431	1014.7 hPa	19.3 C deg	1018.4 hPa	0 C deg
1772774642	1014.6 hPa	19.3 C deg	1018.3 hPa	0 C deg
1772770983	1014.3 hPa	19.4 C deg	1018 hPa	0 C deg
1772763746	1014 hPa	20 C deg	1017.7 hPa	0 C deg
1772760087	1014.1 hPa	20.4 C deg	1017.8 hPa	0 C deg
1772758306	1014.1 hPa	20.7 C deg	1017.8 hPa	0 C deg
1772756476	1014 hPa	20.8 C deg	1017.6 hPa	0 C deg
1772734681	1013 hPa	22.8 C deg	1016.6 hPa	0 C deg
1772732851	1012.7 hPa	22.9 C deg	1016.4 hPa	0 C deg
1772731062	1012.5 hPa	23.1 C deg	1016.2 hPa	0 C deg
1772727403	1012.4 hPa	23.4 C deg	1016 hPa	0 C deg
1772721953	1012.9 hPa	22.9 C deg	1016.5 hPa	0 C deg
1772709267	1015.7 hPa	21 C deg	1019.4 hPa	0 C deg
1772703838	1016.1 hPa	18 C deg	1019.8 hPa	0 C deg
1772700161	1016.5 hPa	17.1 C deg	1020.2 hPa	0 C deg
1772698370	1016.5 hPa	16.7 C deg	1020.2 hPa	0 C deg
1772692922	1016.8 hPa	20.1 C deg	1020.5 hPa	0 C deg
1772687474	1016.9 hPa	19.8 C deg	1020.6 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)