SP8G-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1776685103	249 Count	1000 Count	236 Count	3.97 VDC
1776684202	223 Count	919 Count	211 Count	3.97 VDC
1776683302	169 Count	765 Count	158 Count	3.98 VDC
1776682401	149 Count	652 Count	139 Count	3.97 VDC
1776681500	112 Count	532 Count	103 Count	3.96 VDC
1776680617	82 Count	441 Count	78 Count	3.97 VDC
1776679717	54 Count	318 Count	51 Count	3.97 VDC
1776678816	39 Count	205 Count	37 Count	3.97 VDC
1776677915	27 Count	134 Count	26 Count	3.97 VDC
1776677014	13 Count	62 Count	13 Count	3.97 VDC
1776675213	295 Count	974 Count	281 Count	3.97 VDC
1776674312	276 Count	878 Count	263 Count	3.98 VDC
1776673411	227 Count	740 Count	215 Count	3.98 VDC
1776671609	159 Count	567 Count	149 Count	3.98 VDC
1776670708	145 Count	480 Count	136 Count	3.97 VDC
1776669807	116 Count	398 Count	108 Count	3.97 VDC
1776668906	104 Count	357 Count	97 Count	3.97 VDC
1776668006	90 Count	306 Count	84 Count	3.97 VDC
1776667105	77 Count	263 Count	72 Count	3.97 VDC
1776666204	64 Count	216 Count	60 Count	3.98 VDC
1776665304	51 Count	173 Count	48 Count	3.97 VDC
1776664403	37 Count	119 Count	35 Count	3.97 VDC
1776663502	25 Count	76 Count	24 Count	3.97 VDC
1776662601	12 Count	40 Count	12 Count	3.97 VDC
1776661701	234 Count	1037 Count	214 Count	3.97 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)