DL1LAA-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL1LAA-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1777180200	1023 hPa	4.9 C deg	1024 hPa	0 C deg
1777178388	1022.4 hPa	4.1 C deg	1023.4 hPa	0 C deg
1777176577	1022 hPa	4.2 C deg	1023 hPa	0 C deg
1777027702	1018.5 hPa	24.8 C deg	1019.4 hPa	0 C deg
1777025868	1018.5 hPa	24.6 C deg	1019.4 hPa	0 C deg
1777024048	1018.4 hPa	24.5 C deg	1019.4 hPa	0 C deg
1777022263	1018.4 hPa	23.6 C deg	1019.3 hPa	0 C deg
1777020423	1018.3 hPa	22.9 C deg	1019.3 hPa	0 C deg
1777018625	1018.5 hPa	19.8 C deg	1019.5 hPa	0 C deg
1777014966	1018.7 hPa	13.9 C deg	1019.7 hPa	0 C deg
1777011347	1018.7 hPa	12.6 C deg	1019.7 hPa	0 C deg
1777005919	1018.6 hPa	8.2 C deg	1019.6 hPa	0 C deg
1777004094	1018.6 hPa	8.1 C deg	1019.6 hPa	0 C deg
1777000447	1018.8 hPa	8.4 C deg	1019.8 hPa	0 C deg
1776996823	1019 hPa	8.5 C deg	1020 hPa	0 C deg
1776995007	1019.1 hPa	8.6 C deg	1020.1 hPa	0 C deg
1776993192	1019.2 hPa	8.8 C deg	1020.2 hPa	0 C deg
1776989561	1019.2 hPa	9.1 C deg	1020.2 hPa	0 C deg
1776985935	1019.6 hPa	9.5 C deg	1020.5 hPa	0 C deg
1776984112	1020 hPa	9.9 C deg	1021 hPa	0 C deg
1776982301	1020.3 hPa	10.6 C deg	1021.3 hPa	0 C deg
1776980493	1020.5 hPa	10.6 C deg	1021.5 hPa	0 C deg
1776978676	1020.5 hPa	10.6 C deg	1021.5 hPa	0 C deg
1776975038	1020.8 hPa	9.4 C deg	1021.8 hPa	0 C deg
1776969613	1021.3 hPa	10.5 C deg	1022.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)