IS0AML Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IS0AML. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761552527	0.04 Rx Erlang	0.07 Tx Erlang	15 count/10m	13 count/10m	38 count/10m
1761551327	0 Rx Erlang	0.04 Tx Erlang	1 count/10m	0 count/10m	31 count/10m
1761550127	0.01 Rx Erlang	0.05 Tx Erlang	6 count/10m	6 count/10m	37 count/10m
1761548927	0.01 Rx Erlang	0.06 Tx Erlang	3 count/10m	2 count/10m	36 count/10m
1761547727	0.01 Rx Erlang	0.04 Tx Erlang	3 count/10m	4 count/10m	29 count/10m
1761546527	0.01 Rx Erlang	0.06 Tx Erlang	7 count/10m	5 count/10m	36 count/10m
1761545327	0 Rx Erlang	0.04 Tx Erlang	3 count/10m	1 count/10m	33 count/10m
1761544127	0 Rx Erlang	0.04 Tx Erlang	1 count/10m	0 count/10m	29 count/10m
1761542927	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	1 count/10m	25 count/10m
1761541727	0 Rx Erlang	0.05 Tx Erlang	0 count/10m	0 count/10m	32 count/10m
1761540527	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	0 count/10m	27 count/10m
1761539327	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	0 count/10m	25 count/10m
1761538127	0 Rx Erlang	0.05 Tx Erlang	1 count/10m	1 count/10m	31 count/10m
1761536927	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	0 count/10m	31 count/10m
1761535727	0 Rx Erlang	0.03 Tx Erlang	0 count/10m	0 count/10m	25 count/10m
1761534527	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	0 count/10m	29 count/10m
1761533327	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	0 count/10m	27 count/10m
1761532127	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	0 count/10m	29 count/10m
1761530927	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	1 count/10m	30 count/10m
1761529727	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	1 count/10m	26 count/10m
1761528533	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	0 count/10m	26 count/10m
1761527327	0 Rx Erlang	0.05 Tx Erlang	0 count/10m	0 count/10m	35 count/10m
1761526127	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	0 count/10m	28 count/10m
1761524927	0 Rx Erlang	0.03 Tx Erlang	0 count/10m	0 count/10m	24 count/10m
1761523727	0 Rx Erlang	0.04 Tx Erlang	0 count/10m	0 count/10m	30 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)