IW3FFB-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW3FFB-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1785306535	1005.6 hPa	30.2 C deg	1019.2 hPa	0 C deg
1785304740	1005.4 hPa	28.6 C deg	1019.1 hPa	0 C deg
1785302891	1005.5 hPa	26.2 C deg	1019.3 hPa	0 C deg
1785299215	1005.4 hPa	22.1 C deg	1019.4 hPa	0 C deg
1785297396	1005.2 hPa	22.1 C deg	1019.3 hPa	0 C deg
1785295637	1005.3 hPa	22.6 C deg	1019.3 hPa	0 C deg
1785295577	1005.3 hPa	22.6 C deg	1019.3 hPa	0 C deg
1785293738	1005.3 hPa	23.3 C deg	1019.2 hPa	0 C deg
1785293734	1005.3 hPa	23.3 C deg	1019.2 hPa	0 C deg
1785291893	1005.2 hPa	24 C deg	1019.1 hPa	0 C deg
1785290061	1005.4 hPa	24.3 C deg	1019.3 hPa	0 C deg
1785288232	1005.4 hPa	24.5 C deg	1019.3 hPa	0 C deg
1785286402	1005.6 hPa	24.5 C deg	1019.5 hPa	0 C deg
1785284578	1005.7 hPa	24.5 C deg	1019.6 hPa	0 C deg
1785282748	1005.9 hPa	24.1 C deg	1019.9 hPa	0 C deg
1785280924	1006 hPa	24 C deg	1020 hPa	0 C deg
1785280913	1006 hPa	24 C deg	1020 hPa	0 C deg
1785279084	1006.2 hPa	24.4 C deg	1020.2 hPa	0 C deg
1785277259	1006 hPa	25.3 C deg	1019.9 hPa	0 C deg
1785275423	1005.9 hPa	25.5 C deg	1019.8 hPa	0 C deg
1785273593	1005.8 hPa	25.9 C deg	1019.6 hPa	0 C deg
1785271763	1005.7 hPa	26.3 C deg	1019.5 hPa	0 C deg
1785269933	1005.5 hPa	26.6 C deg	1019.3 hPa	0 C deg
1785268100	1005.3 hPa	27.5 C deg	1019.1 hPa	0 C deg
1785266415	1005 hPa	28.6 C deg	1018.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)